Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
ETA BETA 17" 3pc Splits https://forums.tipec.net/viewtopic.php?f=36&t=24672 |
Page 1 of 1 |
Author: | Big Tomm [ Thu Feb 04, 2021 10:17 am ] |
Post subject: | ETA BETA 17" 3pc Splits |
For sale here I have a set of wheels that took me quite a bit of searching to find. I bought these for my 944 and they seemed to be the ideal sizes (for me anyway) as I didn't want to run 18" or 19" wheels. I am sure these are a copy of something, however they are stamped as ETA BETA in the rear faces of the wheels and are genuine 3 piece split wheels. The joys of this is you can get replacement 40 hole outer lips from germany, for quite a reasonable price, to change the overall width of the wheels, want them wider? Buy a wider outter lip. The wheels all appear atraight and true with no flat spots or buckles. There are however a few small marks to two wheels, one front and one rear. I was going to have these welded up and then dress the areas back followed by a polish, however they aren't really that bad and I was prepared to live with it. However these areas are highlighted in the photos. The PCD is obviously 5x130. Fronts - 17 x 8 ET28 Rears - 17 x 9.5 ET15 I have tried these on both my oval and square dash 944 and they seem to sit well on both considerng the offset differences. On an oval you might want spacers but thats personal prefference. ![]() ![]() ![]() Price wise I have these advertised at £600 however I will happily listen to offers. I am in Kent and collection would be preferred as any potential buyers can confirm the wheels are exactly what they want and that they're happy. |
Author: | Big Tomm [ Thu Feb 04, 2021 11:53 am ] |
Post subject: | Re: ETA BETA 17" 3pc Splits |
SOLD |
Author: | jabriel [ Mon Feb 07, 2022 2:50 pm ] |
Post subject: | Re: ETA BETA 17" 3pc Splits |
Hi, Can I ask where you sourced these from? |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |