Porsche Enthusiasts Club Forum

It is currently Thu Mar 28, 2024 10:53 am
Classic Line Insurance


All times are UTC [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: ETA BETA 17" 3pc Splits
PostPosted: Thu Feb 04, 2021 11:17 am 
Offline

Joined: Sat Feb 18, 2017 6:10 pm
Posts: 49
Location: Rainham, Kent
TIPEC membership: 0
For sale here I have a set of wheels that took me quite a bit of searching to find. I bought these for my 944 and they seemed to be the ideal sizes (for me anyway) as I didn't want to run 18" or 19" wheels.

I am sure these are a copy of something, however they are stamped as ETA BETA in the rear faces of the wheels and are genuine 3 piece split wheels. The joys of this is you can get replacement 40 hole outer lips from germany, for quite a reasonable price, to change the overall width of the wheels, want them wider? Buy a wider outter lip.

The wheels all appear atraight and true with no flat spots or buckles. There are however a few small marks to two wheels, one front and one rear. I was going to have these welded up and then dress the areas back followed by a polish, however they aren't really that bad and I was prepared to live with it. However these areas are highlighted in the photos.

The PCD is obviously 5x130.

Fronts - 17 x 8 ET28
Rears - 17 x 9.5 ET15

I have tried these on both my oval and square dash 944 and they seem to sit well on both considerng the offset differences. On an oval you might want spacers but thats personal prefference.


ImageUntitled

ImageUntitled

ImageUntitled

Price wise I have these advertised at £600 however I will happily listen to offers.

I am in Kent and collection would be preferred as any potential buyers can confirm the wheels are exactly what they want and that they're happy.


Top
 Profile  
Reply with quote  
 Post subject: Re: ETA BETA 17" 3pc Splits
PostPosted: Thu Feb 04, 2021 12:53 pm 
Offline

Joined: Sat Feb 18, 2017 6:10 pm
Posts: 49
Location: Rainham, Kent
TIPEC membership: 0
SOLD


Top
 Profile  
Reply with quote  
 Post subject: Re: ETA BETA 17" 3pc Splits
PostPosted: Mon Feb 07, 2022 3:50 pm 
Offline

Joined: Thu Mar 03, 2011 9:06 pm
Posts: 127
Location: NW London
TIPEC membership: 0
Hi, Can I ask where you sourced these from?

_________________
'91 994t


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 20 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group