|
I've been 'tidying', making room for the new arrival. Most are not worth posting (filters etc), but this kit is worth its weight if you are looking to do a belt change.
Arnnworx (9131) tools for belt change. - Tools are sold
I imported these from the States in 2011 as I had borrowed a set to change the belts on my first 944. When the time came to change the belts and water pump on the second one I was all prepared but a mix of bad weather, busy schedule and an offer I couldn't refuse from the OPC means the tools are unopened.
Kit contains:
Flywheel lock
Thin 27mm spanner
Pin spanner
Tension gauge
and the all important instructions.
£100 posted.
If you have a need need for:
Mirror motors
Mirror glass (both sides)
Plastic engine undertray
Trackrod end
Rear wheel bearing
17" Boxster twists
Anti-roll bars - from a Turbo S (Front 27mm diameter, Rear 18mm diameter)
Send me a pm
| Attachments: |
Arnnworx_tools.jpg [ 74.76 KiB | Viewed 2612 times ]
|
_________________
Mick Simmons
Bristol group - ARO
2010 Cayman S - White
Previously
2005 997 C4S cab - Blue
1990 S2 cab - Red
2006 Boxster - Silver
1988 944S - Black
|
Login
Register
FAQ
Search
