Porsche Enthusiasts Club Forum
https://forums.tipec.net/

18" Split Rim ETA Beta wheels & tyres
https://forums.tipec.net/viewtopic.php?f=36&t=21389
Page 1 of 1

Author:  ALZ1933 [ Mon May 09, 2016 8:41 am ]
Post subject:  18" Split Rim ETA Beta wheels & tyres

ETA BETA 18" ALLOYS

Staggered Porsche fitment 5 X 130 PCD

E.T 49 on the fronts 8J X 18"

E.T 52 on the rears 9.5J X 18"

The wheels were refurbished about 3yrs ago with the lips being finished in high gloss chrome powder coat (no more flaking lacquer like most ETA wheels). The centres were finished in satin black powder coat and come with matching centre caps with a chrome crest, new nuts & washers fitted and all torqued to the correct settings.

The front wheels are fitted with Falken ZE914 225/40/18 with 7mm of tread.

The rear wheels are fitted with Continental Conti Sport Contact 3 265/35/18 one has 6mm one has 4mm of tread.

As pictured above one of the front rims has a slight scuff as I grazed a kerb whilst parking, this has been feathered out so its smooth & barely noticeable when on the car, further pictures are available on request. The last pictures show the wheels fitted to my 944 & 968, they should also fit 964, 965, 996 and Boxster models although I strongly advise you check they will fit your car before buying.

Image
Image
Image

Currently on EBay :
http://www.ebay.co.uk/itm/262427816515? ... 1555.l2649

I will be attending the Silverstone Classic in July if this helps with delivery/collection.

Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/