| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| 924 / 944 / 968 DIY coil over setup plus narrowed Powersteer https://forums.tipec.net/viewtopic.php?f=36&t=20831 |
Page 1 of 1 |
| Author: | evil dan [ Thu Jan 14, 2016 11:29 am ] |
| Post subject: | 924 / 944 / 968 DIY coil over setup plus narrowed Powersteer |
I have a set of coil overs complete with spindles, hubs discs calipers from my 1987 944S - £300 complete The coilovers are off a VW but I have changed the top mounts to 944 ones and changed the strut insert with new Boge inserts. I used these with my early offset setup, I would recommend buying camber adjustment plates, it worked fine but there was no camber adjustment. I also have a power steering rack complete with pump and shaft, this was form the same car but I narrowed/ shortened the steering rods to alloy the use of steel early offset trailing arms on a late car. - £100 pair of steel arms off the same car - £40 |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|