| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| porsche 924 turbo s2 complete engine conversion https://forums.tipec.net/viewtopic.php?f=36&t=20423 |
Page 1 of 1 |
| Author: | nicksonmsport [ Fri Sep 18, 2015 1:50 pm ] |
| Post subject: | porsche 924 turbo s2 complete engine conversion |
decided against using the 924 turbo engine in our race car project. Mainly due to rarity and tuning costs. So will have available a complete engine setup The only parts missing are the crank sensor, exhaust system and waste gate. Complete head and block with inlet and all ancilleries/injectors/wur/dizzy/magnecor leads/alternator/fitted with new cambelt and oil filter and spark plugs. All sensors and loom. Water pump. radiator, fuel distibutor for cis injection. 924 turbo bellhousing and clutch fork aluminium inlet pipes. Airbox with k+n panel filter turbocharger on manifold engine mounts all coolant pipes and header tank. Starter motor clutch and flywheel oil cooler and pipes. Wastegate pipe, turbo feed and return and breather hoses etc literally everything there apart from the ecu and crank sensor then exhaust and Wastegate 95% complete conversion also have a 924 turbo steel fuel tank in vgc along with all the fuel lines/accumulator and brand new replacement lines between pump and accumulator. Also fuel pump torque tube and gear shifter linkage also available would prefer to sell engine complete but may consider breaking up if enough interest call or email for full details 07500665681 info@nicksonmotorsport.co.uk rare to find everything together and all in vgc |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|