Porsche Enthusiasts Club Forum

It is currently Sun Jun 22, 2025 1:22 pm
Classic Line Insurance


All times are UTC




Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: Vitesse MAF & Piggy Back - 944 Turbo
PostPosted: Fri Aug 07, 2015 9:58 pm 
Offline

Joined: Tue Feb 08, 2011 1:36 pm
Posts: 83
Location: North Tyneside/Newcastle upon Tyne
TIPEC membership: 6229
Skype ID: paultate79
Porsche 944 Turbo Vitesse MAF & Piggy back for sale, surplus to requirements.

£700 ovno's considered.


Presenting the Vitesse Racing MAF kit.

Comes complete with MAF Sensor mounted in aluminium farbricated MAF tube, Freeflow cone Airfilter, chip board, KLR Chip, all pipes, hoses and wiring to integrate this item in place of the standard Airflowmeter and Airbox.

The original Air FLow Meter (AFM) on a 944 Turbo uses a spring loaded trap door to measure airflow. It is only able to measure airflow to a pre set level, after this it is maxed out and unable to tell the engine management system any further information regarding the amound of air being consumed. Typically this happens at around 3000 RPM at full throttle and just as the boost is begining to build. After that the engine management computer is completely in the dark regarding how much air is being consumed and therefore how much fuel to add.

Typically we have found that the standard "barn-door" airflow meter fitted to 944 turbo's also causes a restriction in airflow and therefore limits power to around 340BHP whatever you do to everything else. Using the VRMAF kit JMG have tuned even standard 2.5 944 turbo engines to in excess of 420BHP and 400lbs of Torque!

The VRMAF is also something used as standard on all JMG 3.2 944 turbo conversions where in excess of 500 lbs of torque has been achieved!!

Unlike other MAF Kits sold for the 944 turbo (Scivision, Promax, Lindsey, etc) which emulate a original maf sensor, so only benefit from reducing the restriction of airflow, the VR MAF Kit measures the actual airflow all the way to the redline, with ANY level of boost and any level of breathing requirement. Where as on a standard 944 Turbo (even with other MAF kits) the airflow meter is only able to read airflow up to around 4000 RPM and the initial onset of boost.

This product comes with installation instructions and some minor wiring is required to install it

We recommend that this product is fitted with a VR-Piggyback controller, which will allow you to use a laptop to fine tune your fueling.

_________________
87 924 S Le Mans - Black & Turquoise
89 944 turbo - Glacier Metallic
05 Lancer Evolution VIII MR FQ400 #29 - Gunmetal Grey
04 Impreza WR1 #271 - Ice Blue
99 Avant S4 - Light Silver Metallic
99 Impreza RB5 WR Sport #361 - Steel Blue


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group