Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
few bits to clear from container 944/s2/turbo https://forums.tipec.net/viewtopic.php?f=36&t=19837 |
Page 1 of 1 |
Author: | nicksonmsport [ Sat May 16, 2015 3:19 pm ] |
Post subject: | few bits to clear from container 944/s2/turbo |
trying to clear out a container atm. bonnets for 944, i have 3, all in good useable condition, x2 grey and 1 red/burgundy. £10 each collection only. s2/turbo front bumper, good condition, but wants painting £100 s2/turbo front pu undertray good £50 s2/turbo front suspension crossmember, complete with steering uj and power steering rack £50 s2/turbo radiator with fans £30 rear passenger side 1/4 panel cut from mint shell £100 burgundy oval dash, no cracks, good condition £100 s2/turbo passenger side front wing, vgc ready to bolt on. has had repair on rear lower edge to good std £150 rear hatch with rubber spoiler £30 burgundy roof trims front and rear £25 torsion tubes £30 each (perfect to refurbish off the car) removed from s2 and turbo complete heater setup with blower motors/matrix etc £30 all located surrey GU27 lots of other parts available too 07500665681 |
Author: | nicksonmsport [ Sat May 16, 2015 3:39 pm ] |
Post subject: | Re: few bits to clear from container 944/s2/turbo |
also have cream/black oval dash in good condition. couple of very small cracks in top £70 gearboxes s2 non lsd £250 86 turbo non lsd SOLD 7q early 944 box, fitted with torsen lsd diff £550 x1 beige pinstripe tombstone 944 seat, average condition, slight rip in fabric £50 (half leather) |
Author: | DarrylH [ Sat May 16, 2015 4:39 pm ] |
Post subject: | Re: few bits to clear from container 944/s2/turbo |
Any M030 Front/rear Anti Roll bars? |
Author: | nicksonmsport [ Sat May 16, 2015 4:42 pm ] |
Post subject: | Re: few bits to clear from container 944/s2/turbo |
Afraid not mate. just a couple of different sizes from turbo/s2 regards |
Author: | DarrylH [ Sat May 16, 2015 4:48 pm ] |
Post subject: | Re: few bits to clear from container 944/s2/turbo |
What sizes do you have? I'm currently on the small ones front and rear... need something a bit bigger |
Author: | nicksonmsport [ Sat May 16, 2015 5:10 pm ] |
Post subject: | Re: few bits to clear from container 944/s2/turbo |
will have to check for you next week regards |
Author: | Porker [ Thu Jul 09, 2015 4:10 pm ] |
Post subject: | Re: few bits to clear from container 944/s2/turbo |
Do you have a black vinyl luggage cover that still retracts correctly? I have a faulty one, but I'd rather buy a working unit than drill the rivets out and replace / repair the spring. Thanks ![]() |
Author: | 944-Scott [ Thu Jul 09, 2015 8:55 pm ] |
Post subject: | Re: few bits to clear from container 944/s2/turbo |
Don't suppose you have a turbo oil cooler do you? |
Author: | nicksonmsport [ Wed Jul 15, 2015 9:16 pm ] |
Post subject: | Re: few bits to clear from container 944/s2/turbo |
I have a luggage cover that works but has an end cap missing. I also have a turbo oil cooler in good used condition pm me regards |
Author: | MartinRS2K [ Sat Jul 18, 2015 2:16 pm ] |
Post subject: | Re: few bits to clear from container 944/s2/turbo |
nicksonmsport wrote: I have a luggage cover that works but has an end cap missing. I also have a turbo oil cooler in good used condition pm me regards End caps are still available from OPC ![]() |
Author: | nicksonmsport [ Sat Jul 18, 2015 7:24 pm ] |
Post subject: | Re: few bits to clear from container 944/s2/turbo |
Good to know cheers. Will get that sorted regards |
Author: | swb landy [ Thu Sep 24, 2015 11:11 pm ] |
Post subject: | Re: few bits to clear from container 944/s2/turbo |
Looking for a power steering pump tensionerscrewbolty adjuster type thingy if you have one. . . .guess who snapped his. . ![]() |
Author: | nicksonmsport [ Sun Oct 04, 2015 9:50 pm ] |
Post subject: | Re: few bits to clear from container 944/s2/turbo |
Sorry only just seen this. I have these if still needed pm me regards |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |