Porsche Enthusiasts Club Forum
https://forums.tipec.net/

wanted for 944S2
https://forums.tipec.net/viewtopic.php?f=36&t=19381
Page 1 of 1

Author:  neal [ Sun Feb 22, 2015 5:13 pm ]
Post subject:  wanted for 944S2

Hi all,
i am after, 6 original flat topped allen bolts which secure the seats, drivers side black plastic gasket which goes inbetween door and door mirror and finally a black elongated grommet that covers the corner fixing of the black add on piece below the front bumper. All must be A1.
I am in the midlands if this helps.
Thanks Neal

Author:  Waylander [ Mon Feb 23, 2015 12:24 am ]
Post subject:  Re: wanted for 944S2

all pennies from your local Porsche dealer

Mirror Desk pad 944 731 505 01 (LH) or 944 731 506 01 (RH) £3.37 each

front under tray grommet 951 505 347 00 £1.72

bolts 900 119 030 02 £1.44 each

total £14.00 including VAT from your friendly local Porsche Dealer

Author:  neal [ Mon Feb 23, 2015 5:32 pm ]
Post subject:  Re: wanted for 944S2

Hello,
thanks for the reply. I assumed they would be expensive from porsche. Will get things sorted.

Thanks, Neal

Author:  JasonGibson [ Mon Feb 23, 2015 6:00 pm ]
Post subject:  Re: wanted for 944S2

You'll be surprised how cheap some bits are.
And how expensive others are.

Always worth asking them first.

Author:  JW590 [ Mon Feb 23, 2015 8:42 pm ]
Post subject:  Re: wanted for 944S2

First port of call should always be OPC - and don't forget to ask for your discount.

Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/