| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| 944 turbo engine parts, perfect for turbo conversion https://forums.tipec.net/viewtopic.php?f=36&t=19249 |
Page 1 of 1 |
| Author: | nicksonmsport [ Sat Jan 31, 2015 5:24 pm ] |
| Post subject: | 944 turbo engine parts, perfect for turbo conversion |
been collecting parts to build a turbo engine, but no longer needed as I have something in the pipeline perfect for someone wanting to convert a lux to turbo. all the parts are bolt on, all you need to do is put turbo pistons in your lux block certainly cheaper than buying a good turbo these days but all the performance 944 turbo 86 gearbox non lsd £350 s2 gearbox for faster acceleration £300 s2/turbo driveshafts pair £100 complete turbo cylinder head £400 turbo camshaft in tower complete £150 turbo sump with oil return and bolt £50 oil feed £20 oil return and bolt £30 bosch injectors on rail with damper /reg £100 aux water pump £45 MAF £85 exhaust manifold complete £100 crossover pipe £80 downpipe £45 dme ecu £200 pair of std turbo chips £25 j pipe £40 intercooler £85 oil cooler £60 engine block oil cooler/filter housing/pressure switch £125 expansion tank, turbo with 2 outlets £65 radiator and fans s2/turbo £80 dump valve £20 air oil separator and pipe £45 inlet manifold vapour blasted £100 (looks like new) turbo steering shaft in good condition no play in ujs £60 knock sensor £10 pair of crank sensors on bracket £80 set of turbo beru leads £50 cambelt covers front and rear £40 set of 4 turbo low compression pistons on rods with rings all in vgc £150 k26/8 turbo slight play but looks good to use, or rebuild for piece of mind £225 k26/6 turbo in bits, ready for rebuild or hybrid etc £100 open to sensible offers on items, or can do a deal on multiples etc, or a package for the lot etc. regards |
|
| Author: | simon macturbo [ Tue Feb 03, 2015 7:35 pm ] |
| Post subject: | Re: 944 turbo engine parts, perfect for turbo conversion |
Knock sensor please and would you have Dme temp sensor near front cylinder you have MAF for 85.00 i take it that is standard barn door air flow meter and not modern mass air flow sensor. UK postage |
|
| Author: | nicksonmsport [ Tue Feb 10, 2015 12:17 am ] |
| Post subject: | Re: 944 turbo engine parts, perfect for turbo conversion |
hi sorry for delay. i have both those parts as far as i know. yes the MAF is standard 944t part. can do knock and temp sensors for £40 delivered pm me if you want the items. regards |
|
| Author: | nicksonmsport [ Mon Feb 23, 2015 10:14 pm ] |
| Post subject: | Re: 944 turbo engine parts, perfect for turbo conversion |
still got all of this |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|