| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Breaking 1987 944S ventiler https://forums.tipec.net/viewtopic.php?f=36&t=18755 |
Page 1 of 1 |
| Author: | evil dan [ Thu Oct 23, 2014 10:45 am ] |
| Post subject: | Breaking 1987 944S ventiler |
After the cambelt failed I've been slowly but surely stripping the car and selling parts. I'm keeping the wheels suspension and brakes but everything else is available, including the block and head with valve damage but the tensioner mount is fine. Beige interior carpet set, centre console, dash etc. front Seats sold ECU, fuses, switches etc still available What do you need? I'm based in Liverpool |
|
| Author: | caprixpack [ Thu Oct 23, 2014 2:06 pm ] |
| Post subject: | Re: Breaking 1987 944S ventiler |
do you still have the boot carpet? if so is is for a full size wheel or smaller wheel thanks |
|
| Author: | evil dan [ Thu Oct 23, 2014 2:14 pm ] |
| Post subject: | Re: Breaking 1987 944S ventiler |
Hi, yes I've still got the complete beige carpet set. The boot carpet is for the smaller collapsable tyre spare. Dan |
|
| Author: | caprixpack [ Thu Oct 23, 2014 2:21 pm ] |
| Post subject: | Re: Breaking 1987 944S ventiler |
bugger thanks anyway |
|
| Author: | ALZ1933 [ Thu Oct 23, 2014 6:46 pm ] |
| Post subject: | Re: Breaking 1987 944S ventiler |
I'm looking for the switch blanks that fit into the gear stick surround, the ones next to the rear wiper/sunroof switch etc. If you have any available let me know. Alan |
|
| Author: | DICKO74 [ Fri Oct 24, 2014 8:57 pm ] |
| Post subject: | Re: Breaking 1987 944S ventiler |
Hi, In need of the plastic trim that holds the clock, cigarette lighter etc, it runs from the passenger vent to the heater control area. Price please delivered in UK. Thanks Adrian |
|
| Author: | richlyons [ Sat Oct 25, 2014 12:06 pm ] |
| Post subject: | Re: Breaking 1987 944S ventiler |
Are the front and rear bumpers still available? Also does it have a arm rest? |
|
| Author: | evil dan [ Sun Oct 26, 2014 10:05 am ] |
| Post subject: | Re: Breaking 1987 944S ventiler |
The front bumper is damaged, but the back bumper is there. Ill check for switch blanks and dash trim and add photos later today! |
|
| Author: | richlyons [ Sun Oct 26, 2014 6:54 pm ] |
| Post subject: | Re: Breaking 1987 944S ventiler |
evil dan wrote: The front bumper is damaged, but the back bumper is there. Ill check for switch blanks and dash trim and add photos later today! How much for the back? Where about's are you? im also after the clutch pedal assembly, assuming its a hydro set up? |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|