| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| 944 2.7 engine parts and some S2 bits https://forums.tipec.net/viewtopic.php?f=36&t=18679 |
Page 1 of 1 |
| Author: | Mac944 [ Fri Oct 10, 2014 3:19 pm ] |
| Post subject: | 944 2.7 engine parts and some S2 bits |
Hi all, I have a 2.7 944 race engine, surplus to requirements which has been stripped down for parts. The engine was rebuilt in around 2007 by the previous owner and had been raced on and off up until 2010 and then raced again by me from 2012 until early this year when I swapped to an S2 lump. I have listed some of the parts on eBay here, including: Cam tower/box complete with cam, cam gear Inlet manifold Throttle body Block (wear to one cylinder) including matched balance shaft covers and crank girdle Flywheel Oil cooler housing and matrix Oil pressure relief valve - latest revision (brand new in packaging) 2.7 DME - chipped with race map 2.7 DME - stock S2/968/944 turbo - twin radiator fan S2 front bumper support bar 2 x S2 front bumper support bar brackets still more to add including: Bell housing Clutch cover Oil pressure relief valve 2.7 pistons and rods complete S2 throttle body and MAF Fibreglass 2 piece dash board Crossmember/subframe |
|
| Author: | Mac944 [ Tue Nov 04, 2014 4:49 pm ] |
| Post subject: | Re: 944 2.7 engine parts and some S2 bits |
Edited post with new parts available |
|
| Author: | Mac944 [ Sat Nov 08, 2014 4:23 pm ] |
| Post subject: | Re: 944 2.7 engine parts and some S2 bits |
More bits added to my eBay account including several wheel sets as well |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|