| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| 924 turbo engine s2, plus lots of parts and turbocharger etc https://forums.tipec.net/viewtopic.php?f=36&t=18504 |
Page 1 of 1 |
| Author: | nicksonmsport [ Wed Sep 10, 2014 5:05 pm ] |
| Post subject: | 924 turbo engine s2, plus lots of parts and turbocharger etc |
got a 924 turbo engine from an s2, in very good running order before removal. majority of ancilleries/parts available from the engine bay, good working used turbo and manifold. happy to sell parts seperate from engine (ancilleries/inlet/fuel dizzy/etc) also the majority of the rest of the car available as nearly everything being replaced. call me 07500665681 or email info@nicksonmotorsport.co.uk keen to clear items as workshop move happening and parts being bought for the 924t project! |
|
| Author: | Shark [ Wed Sep 10, 2014 6:37 pm ] |
| Post subject: | Re: 924 turbo engine s2, plus lots of parts and turbocharger |
Hi there, I am looking for a 931 nose panel with the four vents, is this part available? Thanks |
|
| Author: | nicksonmsport [ Wed Sep 10, 2014 8:00 pm ] |
| Post subject: | Re: 924 turbo engine s2, plus lots of parts and turbocharger |
If u cant find one I could fabricate one from a normal badge panel if required |
|
| Author: | Shark [ Thu Sep 11, 2014 12:08 am ] |
| Post subject: | Re: 924 turbo engine s2, plus lots of parts and turbocharger |
I'm having bother hunting one down. My plan is to have it on my 944 turbo, I know they don't fit so the plan was to do the s2/turbo nose panel mod. Thank you for your kind offer. Would you be able to fabricate a 944 turbo/s2 front panel?  I could have a hunt around for a set of vents.. EDIT: found a set and bought them. |
|
| Author: | Shark [ Thu Sep 11, 2014 11:09 am ] |
| Post subject: | Re: 924 turbo engine s2, plus lots of parts and turbocharger |
nicksonmsport wrote: If u cant find one I could fabricate one from a normal badge panel if required I have had a look at your website and I see this is your forte! Very impressive work, well done. Yes, I would like your help with this project. I wanted to do this.. 931 nose and cut out the vents..  cut out same section from 951 nose..  fabricate in the vents to the 951 nose..  ..and it should look like this when done!  I have already bought four new (repro) vents and was contemplating buying a fibreglass panel (with 4 holes for an S2/951) though I would prefer not to go the fibreglass route as it may not look just right. Would you be able to knock something together if I supply a S2/951 panel and a set of vents? Thanks! |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|