Porsche Enthusiasts Club Forum
https://forums.tipec.net/

Wanted 944T turbo discharge pipe.
https://forums.tipec.net/viewtopic.php?f=36&t=17491		 Page 1 of 2
Author:  pauly [ Sat Apr 12, 2014 5:46 pm ]
Post subject:  Wanted 944T turbo discharge pipe.
I'm looking for the short exhaust pipe that bolts up to the turbo. I fancy modifying one instead of buying a 3" version.
Author:  frenchy [ Sun Apr 20, 2014 8:35 pm ]
Post subject:  Re: Wanted 944T turbo discharge pipe.
Pauly, got one here which has had the flange welded and is not 100% sqaure but still usable ?
Author:  t3rra [ Sun Apr 20, 2014 10:04 pm ]
Post subject:  Re: Wanted 944T turbo discharge pipe.
Iv got one as well still attached to the turbo. Having fab speed one In my hand I don't think it would be to hard to remove your existing and get it copied in 3" would need to reduce back to fit stock exhaust bolt pattern unless you had that part changed as well.

Fab speed is 2 bends weild together and flange each end
Author:  pauly [ Sun Apr 20, 2014 11:52 pm ]
Post subject:  Re: Wanted 944T turbo discharge pipe.
frenchy wrote:
Pauly, got one here which has had the flange welded and is not 100% sqaure but still usable ?


I'm not confident I'll get the inner pipe out without cutting it in half so I'd make a jig to bolt it into first, so the correct flange position is important. TBH it wouldn't be worth much money to me as it is. Cheers anyway.
Author:  pauly [ Mon Apr 21, 2014 12:00 am ]
Post subject:  Re: Wanted 944T turbo discharge pipe.
t3rra wrote:
Iv got one as well still attached to the turbo. Having fab speed one In my hand I don't think it would be to hard to remove your existing and get it copied in 3" would need to reduce back to fit stock exhaust bolt pattern unless you had that part changed as well.

Fab speed is 2 bends weild together and flange each end


The important thing is the spacing and orientation of the flanges, hence using the original to make a jig. I'd rather cut up a spare now than wait until I remove mine.
Author:  t3rra [ Tue Apr 22, 2014 8:01 pm ]
Post subject:  Re: Wanted 944T turbo discharge pipe.
You maybe on to something stock id is 58 and the od is 68 so 5mm thick however it dose look like the 2nd skin could stop before the flange so you would remove the out side rather then inner
Author:  pauly [ Tue Apr 22, 2014 11:04 pm ]
Post subject:  Re: Wanted 944T turbo discharge pipe.
t3rra wrote:
You maybe on to something stock id is 58 and the od is 68 so 5mm thick however it dose look like the 2nd skin could stop before the flange so you would remove the out side rather then inner


Probably have to cut it in half to remove the inner pipe. The exit on my turbo is 63mm so looks like a gutted standard pipe would work.
Author:  pauly [ Fri May 02, 2014 3:16 pm ]
Post subject:  Re: Wanted 944T turbo discharge pipe.
Buuump :) .
Author:  DaveM [ Sat May 24, 2014 7:32 am ]
Post subject:  Re: Wanted 944T turbo discharge pipe.
I saw this and thought of you

http://pages.ebay.com/link/?nav=item.vi ... 1362069840

PORSCHE 944 TURBO 951 EXHAUST TURBO TO WASTEGATE PIPE
Author:  pauly [ Sat May 24, 2014 11:15 am ]
Post subject:  Re: Wanted 944T turbo discharge pipe.
Thanks, flange looks a bit rough though.
Author:  DaveM [ Sat May 24, 2014 1:45 pm ]
Post subject:  Re: Wanted 944T turbo discharge pipe.
It does but I thought if your cutting it up it might be OK. Also I haven't seen one on eBay for awhile
Author:  pauly [ Sat May 24, 2014 2:33 pm ]
Post subject:  Re: Wanted 944T turbo discharge pipe.
You're right, though I want the flanges to be in good shape. TBH I don't need the bigger pipe until I fit the new turbo, so I'll wait for a better one to turn up. Cheers anyway.
Author:  t3rra [ Sat May 24, 2014 7:39 pm ]
Post subject:  Re: Wanted 944T turbo discharge pipe.
111362069840 eBay item £35
Author:  pauly [ Sat May 24, 2014 10:55 pm ]
Post subject:  Re: Wanted 944T turbo discharge pipe.
That's the one DaveM mentioned.
Author:  t3rra [ Sun May 25, 2014 4:01 pm ]
Post subject:  Re: Wanted 944T turbo discharge pipe.
With a direct link as well.
Page 1 of 2 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/