Porsche Enthusiasts Club Forum
https://forums.tipec.net/

Breaking 944 S2
https://forums.tipec.net/viewtopic.php?f=36&t=16431
Page 1 of 4

Author:  mr2haz [ Sun Nov 03, 2013 8:01 pm ]
Post subject:  Breaking 944 S2

Breaking a 944 S2. As I am trying to keep it looking complete for as long as possible so I will start with the interior bits.

Author:  fire3500 [ Sun Nov 03, 2013 8:46 pm ]
Post subject:  Re: Breaking 944 S2

mr2haz wrote:
Breaking a 944 S2. As I am trying to keep it looking complete for as long as possible so I will start with the interior bits.


Hiya,

Can you please give me a price for a few bits please, assuming it's a coupe?

If it is a non-AC car - heater control panel and facia
Sunvisor clips
Seat tilt levers (might be interested in the f & r seats actually...)
Rear boot blind (nosy persons cover)
Rear light lenses
Sunroof interior panel (if black)
Boot carpet side clips (mushroom shaped ones) (if black)

Cheers dude!

Author:  stevew [ Sun Nov 03, 2013 8:51 pm ]
Post subject:  Re: Breaking 944 S2

PM'd for interior

Author:  mr2haz [ Sun Nov 03, 2013 9:54 pm ]
Post subject:  Re: Breaking 944 S2

PMs sent.

It is a silver coupe with linen leather interior.

Author:  t3rra [ Sun Nov 03, 2013 11:01 pm ]
Post subject:  Re: Breaking 944 S2

Do you have a passangers fog light, mine as acquired a stone chip.

If you could email me a price and pic
Tdppwgjdpp@aol.com

Thanks

Author:  mr2haz [ Sun Nov 03, 2013 11:15 pm ]
Post subject:  Re: Breaking 944 S2

There are no front end parts available.

Author:  pad944968 [ Mon Nov 04, 2013 7:36 am ]
Post subject:  Re: Breaking 944 S2

Hi

Do you still have the radiator?

Thanks

Author:  mr2haz [ Mon Nov 04, 2013 7:44 am ]
Post subject:  Re: Breaking 944 S2

pad944968 wrote:
Hi

Do you still have the radiator?

Thanks


I do have the radiator and it does look undamaged but am unsure if it can be removed from the mangled front end in one piece. l try to take it off this weekend and let you know how I get on.

Author:  Gunscrossed [ Mon Nov 04, 2013 11:05 am ]
Post subject:  Re: Breaking 944 S2

Is the gear knob/gaiter black and in good condition? If so price plese.

Author:  ryan 944 [ Mon Nov 04, 2013 12:07 pm ]
Post subject:  Re: Breaking 944 S2

Hi,

is the lower batwing of the front bumper any good? if so how much

cheers Ryan

Author:  mr2haz [ Mon Nov 04, 2013 6:42 pm ]
Post subject:  Re: Breaking 944 S2

Gunscrossed wrote:
Is the gear knob/gaiter black and in good condition? If so price plese.


I think it is brown. I will get pictures in the next few days.

Author:  mr2haz [ Mon Nov 04, 2013 6:43 pm ]
Post subject:  Re: Breaking 944 S2

ryan 944 wrote:
Hi,

is the lower batwing of the front bumper any good? if so how much

cheers Ryan


It is no good.

Author:  neal [ Mon Nov 04, 2013 6:53 pm ]
Post subject:  Re: Breaking 944 S2

Hi,
Are the interior B post covers (black padded vinyl) in between the speaker panel and roof lining available, both sides needed ? Also speaker panels, a couple of the securing screws and cups. Is a Bridge Spoiler fitted ? Original tyre compresser ? Are the seats the sport model, if so what condition are they and the front bumper has a black plastic moulding screwed to it at the bottom, at the front corners there are oval shaped rubber covers covering the screws are these available ?
Thanks Neal

Author:  mr2haz [ Mon Nov 04, 2013 7:43 pm ]
Post subject:  Re: Breaking 944 S2

neal wrote:
Hi,
Are the interior B post covers (black padded vinyl) in between the speaker panel and roof lining available, both sides needed ? Also speaker panels, a couple of the securing screws and cups. Is a Bridge Spoiler fitted ? Original tyre compresser ? Are the seats the sport model, if so what condition are they and the front bumper has a black plastic moulding screwed to it at the bottom, at the front corners there are oval shaped rubber covers covering the screws are these available ?
Thanks Neal


B pillar black vinyl covers are there.
Is it the screw fixings that hold the rear quarter trim panels you are looking for? If so they will be inside the car somewhere as I have removed the trims.
It is not the bridge spoiler model.
The original tyre compressor is not present.
Seats are provisionally sold.
Rubber covers will be required on my own car.

Author:  neal [ Mon Nov 04, 2013 7:53 pm ]
Post subject:  Re: Breaking 944 S2

Yes, the screws and cup washers which hold the speaker panel on, underneath the side window. How much would they be and both B post vinyls (if they are perfect)
Thanks Neal

Page 1 of 4 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/