Porsche Enthusiasts Club Forum

i have a pair of medium blacks which came off the front of my 86 944turbo. these will fit many other porsches, and are std fit on m030 944 turbos, 928 s4, and 968 clubsport

radial mount. these are the later type with the bigger type dust seals cheaper to rebuild.

although you wont need to worry about that

i fully stripped the calipers down, and removed any slight sign of plate lift (very minimal) cleaned up the spring plates, replaced the stainless steel screws, new brake lines joining the 2 sides of the caliper together. replaced x2 of the larger 44mm seals. all the other dust seals are perfect, and pistons all move freely.

basically a pair of calipers that have been stripped and rebuilt ready to bolt onto your car.

to make these perfect all u would need to do is get them freshly powdercoated which is around £120 from a specialist, although they are presentable as they are, but do have some marks and ageing to them as expected.

as good a pair of used calipers u will find!

£400.00 delivered in the uk.