| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| WANTED - 924 and 944 Gear levers (not the knob or gaitor) https://forums.tipec.net/viewtopic.php?f=36&t=14738 |
Page 1 of 1 |
| Author: | jmgarage [ Sat Feb 23, 2013 12:16 pm ] |
| Post subject: | WANTED - 924 and 944 Gear levers (not the knob or gaitor) |
If anyone is breaking up a 944, we constantly need these as shown in the picture that follows. We will pay £10 each delivered to us, in any condition, worn or not. We use them to remanufacture into the 9XX FrontShifts which come with a refund policy for ones we are sent back, but no one seems to ever send back their old one! This is the part we are always looking for...  which we turn into these...  Which feature a stainless steel pin which will not wear, erode or corrode like the original ones. |
|
| Author: | kongsodoken [ Sat Feb 23, 2013 6:50 pm ] |
| Post subject: | Re: WANTED - 924 and 944 Gear levers (not the knob or gaitor |
Mine coming out tomorrow ...all being well  I'll post it off Tuesday |
|
| Author: | jmgarage [ Mon Feb 25, 2013 5:34 pm ] |
| Post subject: | Re: WANTED - 924 and 944 Gear levers (not the knob or gaitor |
Thanks! It's becoming a real problem to get hold of these, no one sends them back, even with the fact they will get money refunded to them when they do! |
|
| Author: | mfbx6mn3 [ Thu Mar 14, 2013 9:54 am ] |
| Post subject: | Re: WANTED - 924 and 944 Gear levers (not the knob or gaitor |
I think your problem might be you are being a little light with your offer. You charge £7.80 to post the new one out but only offer £10 for returning one. I recently bought one of your refurbs and I can tell you the reason you don't have the original back from me is that I'm not going to the effort of posting it back for £2.20 (minus packaging costs). |
|
| Author: | jmgarage [ Sat Mar 16, 2013 10:03 am ] |
| Post subject: | Re: WANTED - 924 and 944 Gear levers (not the knob or gaitor |
Good point, need to address the shipping charges and costs and the core charge/refund. Also currently looking at having them made from scratch out of stainless steel for the lever and ball as well as the pin, so it will be a completely new unit throughout. |
|
| Author: | t3rra [ Sat Mar 16, 2013 10:43 am ] |
| Post subject: | Re: WANTED - 924 and 944 Gear levers (not the knob or gaitor |
What's a new pin diameter ? I found what looks like a new lever from my S 9.86 all across is it possable 2 wear evenly? |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|