Porsche Enthusiasts Club Forum
https://forums.tipec.net/

Wanted 944 front end parts or whole car for parts
https://forums.tipec.net/viewtopic.php?f=36&t=14204
Page 1 of 1

Author:  ryan 944 [ Sat Nov 24, 2012 6:26 pm ]
Post subject:  Wanted 944 front end parts or whole car for parts

Hi all,

I am looking for front end parts for my 1984 black 944, or a whole car for parts. as my car has a s2 front end at the minute and think I am going to put it back to s1.
Let me know if you can help

Thanks Ryan :D

Author:  t3rra [ Sat Nov 24, 2012 6:33 pm ]
Post subject:  Re: Wanted 944 front end parts or whole car for parts

You will require

Front wings, if current bumper is genuine s2/turbo

Badge pannle
Head light covers + plastic fronts 2 lights ( MIT have in red )
Bumper and valance ( Iv got in red with fogs )
Lights.
Bumper mounts, one toe and one crush type ( think Iv got )

Possable wiring as the n/a plugs for lights are differnt 2 turbo/s2 think Iv got these some where as I did the swap other way. N/a turbo.

Possable under tray.

U will be left with front bumper carrier and under tray 2 bumper if there.

Author:  Althejazzman [ Sat Nov 24, 2012 6:46 pm ]
Post subject:  Re: Wanted 944 front end parts or whole car for parts

Interesting. I don't think I've ever seen anyone put it back to the early front end, but I do know that people have problems making the S2 panels fit. Is this why you're putting it back?

Author:  ryan 944 [ Sat Nov 24, 2012 7:13 pm ]
Post subject:  Re: Wanted 944 front end parts or whole car for parts

Althejazzman wrote:
Interesting. I don't think I've ever seen anyone put it back to the early front end, but I do know that people have problems making the S2 panels fit. Is this why you're putting it back?


The s2 wings have some rust at the bottom, and I fancey a retro look might change the wheels to some retro deep disc as well, I put the s2 front end on a few years back changing the wings, badge panel, bumper, bumper mounts etc etc I had all the s1 part but my brother has one aswell and he ended up using a lot of my parts as were he went to have it resprayed the front corner was damaged and filled.

Author:  ryan 944 [ Sat Nov 24, 2012 7:15 pm ]
Post subject:  Re: Wanted 944 front end parts or whole car for parts

t3rra wrote:
You will require

Front wings, if current bumper is genuine s2/turbo

Badge pannle
Head light covers + plastic fronts 2 lights ( MIT have in red )
Bumper and valance ( Iv got in red with fogs )
Lights.
Bumper mounts, one toe and one crush type ( think Iv got )

Possable wiring as the n/a plugs for lights are differnt 2 turbo/s2 think Iv got these some where as I did the swap other way. N/a turbo.

The front end is s2, wings etc etc, where are you and what sort of money would you be looking for?

Thanks Ryan

Possable under tray.

U will be left with front bumper carrier and under tray 2 bumper if there.

Author:  t3rra [ Sat Nov 24, 2012 11:16 pm ]
Post subject:  Re: Wanted 944 front end parts or whole car for parts

MIT be worth, getting the wings repired, and made 2 fit n/a set up
Rather then new wings and paint, should be a lot easyer 2 line everything up and fit if the wings are on from factory.

Got new wings on my current turbo and they need bending or twisting 2 get the lines perfect.

Author:  ryan 944 [ Mon Nov 26, 2012 10:12 pm ]
Post subject:  Re: Wanted 944 front end parts or whole car for parts

t3rra wrote:
MIT be worth, getting the wings repired, and made 2 fit n/a set up
Rather then new wings and paint, should be a lot easyer 2 line everything up and fit if the wings are on from factory.

Got new wings on my current turbo and they need bending or twisting 2 get the lines perfect.


The wings are s2 so will not fit with the early bumper

Author:  t3rra [ Tue Nov 27, 2012 9:10 pm ]
Post subject:  Re: Wanted 944 front end parts or whole car for parts

The differnce is a small triangle shape where the wing meets bumper, about 6mm by 3mm not much. I cut my n/a wing 2 turbo shape when I did mine.

Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/