t3rra wrote:
. But you can get new sides from Opc about £7 .
.
.
just emailed OPC they have quote £100.01 each side for the front bits and £82 each side for the rears
| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Wanted S2/Turbo under wing plastic moulding and boot blind https://forums.tipec.net/viewtopic.php?f=36&t=14182 |
Page 1 of 1 |
| Author: | wildoliver [ Mon Nov 19, 2012 2:36 pm ] |
| Post subject: | Wanted S2/Turbo under wing plastic moulding and boot blind |
Hi guys, I'm after the following bits, I keep missing them on ebay or they end up being grotty when you ask questions. I need a drivers side (os) front wing under moulding, this is the part which meets the sill moulding it's a little curved bit of plastic that has in my case dropped off due to a bodging previous owner. It's the part actually under the sill/wing not the rubbing strip along the door/wings. I only need the front wing bit, don't care if it's got missing mounts etc. I would take a full set if you don't want to split. I also need a luggage/boot blind, colour flexible as long as it isn't blue or brown, ideally I'd like black, but burgundy would be fine, I'm after the one piece seat type not the baggy cloth 2 piece type. I would like the end caps to be in decent condition at least on the spring end. I also need an S2/Turbo badge panel/nose panel in undented decent condition. All parts will need posting to East Yorkshire. Many thanks! |
|
| Author: | t3rra [ Mon Nov 19, 2012 3:02 pm ] |
| Post subject: | Re: Wanted S2/Turbo under wing plastic moulding and boot bli |
Sold the rear roller blind, 2 another member. But you can get new sides from Opc about £7 MIT be easyer find one that needs them and put new ones on. Iv still got the under sills and badge pannle. |
|
| Author: | Mitch [ Mon Nov 19, 2012 3:51 pm ] |
| Post subject: | Re: Wanted S2/Turbo under wing plastic moulding and boot bli |
ive got a black luggage blind close to mint. £35 delivered sound fair?? |
|
| Author: | wildoliver [ Mon Nov 19, 2012 5:11 pm ] |
| Post subject: | Re: Wanted S2/Turbo under wing plastic moulding and boot bli |
Sounds fair to me, can you just check the ends for me, as long as they aren't cracked badly or previously cracked and badly repaired, also as long as the blind pulls out and the hooks are intact I'll take it! All I will say is I've posted a few of these over the years and they need loads of packing around the ends, that plastic is so brittle. Terra I'll take those with pleasure I was just waiting for a reply from you about them last time, how much do you want for them posted? Oliver |
|
| Author: | t3rra [ Mon Nov 19, 2012 6:31 pm ] |
| Post subject: | Re: Wanted S2/Turbo under wing plastic moulding and boot bli |
Really? Sorry I was waiting a reply from you. Thought u had gone quite. |
|
| Author: | Mitch [ Tue Nov 20, 2012 12:32 am ] |
| Post subject: | Re: Wanted S2/Turbo under wing plastic moulding and boot bli |
ill post a pic or two tomorrow for you, will be very well packaged. |
|
| Author: | Mitch [ Tue Nov 20, 2012 12:48 am ] |
| Post subject: | Re: Wanted S2/Turbo under wing plastic moulding and boot bli |
the blind pulls and retracts correctly, the hooks are intact and the blind material is excellent but unfortunately the plastic end cases have chipped a bit, not broken but not perfect. let me know if you still want it. |
|
| Author: | wildoliver [ Tue Nov 20, 2012 10:57 am ] |
| Post subject: | Re: Wanted S2/Turbo under wing plastic moulding and boot bli |
As long as they don't affect the integrity of them they will be fine. Paypal/Bank transfer? |
|
| Author: | kongsodoken [ Tue Nov 20, 2012 11:46 am ] |
| Post subject: | Re: Wanted S2/Turbo under wing plastic moulding and boot bli |
t3rra wrote: . But you can get new sides from Opc about £7 . . just emailed OPC they have quote £100.01 each side for the front bits and £82 each side for the rears
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|