Porsche Enthusiasts Club Forum
https://forums.tipec.net/

944 S2 Front ARB Polybushes - 25.5mm
https://forums.tipec.net/viewtopic.php?f=36&t=13742		 Page 1 of 1
Author:  Highwayman [ Thu Aug 30, 2012 8:20 pm ]
Post subject:  944 S2 Front ARB Polybushes - 25.5mm
I have a couple of Powerflex bushes for the front ARB on a 944 S2 that have been fitted on my car in error for only a few hundred miles (should have been 26.8mm :roll: !). They are 25.5mm internal diameter and I'm only looking for £12.50 including UK postage if anyone wants them (normal retail is around £29). The part number is PFF87-204-25.5, if you want to check compatibility.

Phil
Author:  beario [ Wed Oct 17, 2012 12:30 pm ]
Post subject:  Re: 944 S2 Front ARB Polybushes - 25.5mm
i have a 1990 s2 would these fit my car...
Author:  EDDIE [ Wed Oct 17, 2012 4:19 pm ]
Post subject:  Re: 944 S2 Front ARB Polybushes - 25.5mm
I think you will find S2's have 26.8 mm antiroll bars mine has.best to measure.

Nick :)
Author:  Highwayman [ Wed Oct 24, 2012 10:00 pm ]
Post subject:  Re: 944 S2 Front ARB Polybushes - 25.5mm
As Nick says, best to measure the bar to be certain, as there seem to be a few variants, and that's the mistake that I made :oops: !

Phil
Author:  tr7v8 [ Wed Oct 24, 2012 10:17 pm ]
Post subject:  Re: 944 S2 Front ARB Polybushes - 25.5mm
My 87 2.5 NA was a 25.5mm bar.
Author:  beario [ Fri Oct 26, 2012 2:28 pm ]
Post subject:  Re: 944 S2 Front ARB Polybushes - 25.5mm
i measured the front anti roll bar in the centre and it was 26.98 according to the gauge...or 17.98 at the end...???any ideas...
Author:  EDDIE [ Fri Oct 26, 2012 2:48 pm ]
Post subject:  Re: 944 S2 Front ARB Polybushes - 25.5mm
you have a 26.8mm bar , the little extra is rust/dirt etc.at the end it is tapered and not the size of the bar for ref. purpose.

Nick :)
Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/