| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Wanted -large spacers https://forums.tipec.net/viewtopic.php?f=36&t=13574 |
Page 1 of 1 |
| Author: | Catamax944 [ Sat Aug 04, 2012 11:41 pm ] |
| Post subject: | Wanted -large spacers |
I am looking for some 30mm+ spacers |
|
| Author: | t3rra [ Sun Aug 05, 2012 11:02 am ] |
| Post subject: | Re: Wanted -large spacers |
Iv got 20mm x4 and 10mm x4 as well. But will need longer studs, as they slip on. Steel nuts that open ended Got some 88 hubs with the longer studs in already. With new wheel Bearings. |
|
| Author: | Catamax944 [ Tue Aug 07, 2012 7:36 pm ] |
| Post subject: | Re: Wanted -large spacers |
thanks but i already have 20mm ,need 30-35mm |
|
| Author: | t3rra [ Tue Aug 07, 2012 8:16 pm ] |
| Post subject: | Re: Wanted -large spacers |
No worries Can you not put 10mm and 20mm or is this bad? |
|
| Author: | Catamax944 [ Tue Aug 07, 2012 8:33 pm ] |
| Post subject: | Re: Wanted -large spacers |
wouldn't be safe and even larger studs would be needed |
|
| Author: | t3rra [ Tue Aug 07, 2012 9:15 pm ] |
| Post subject: | Re: Wanted -large spacers |
What wheels are you trying 2 fit? Cup 993 wheels need 10mm front 20mm rear, but left the wheels inside the arches compered 2 my 18" anter wheels, so I spaced them out 20mm front 30mm rear( rear was 20mm+10mm ) |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|