Hi
944 or 928 S2 ?
All the best Brett
| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Wanted interior parts https://forums.tipec.net/viewtopic.php?f=36&t=12532 |
Page 1 of 1 |
| Author: | mr2haz [ Mon Mar 12, 2012 9:01 pm ] |
| Post subject: | Wanted interior parts |
I am looking for the following interior parts to tidy up my s2 convertible: Complete ciggy lighter, The dash trim the ciggy lighter is fitted to, One seat motor cover and four fitting screws for these covers, Two mat holders (fitted to under the seat rail with the popper for the floor mat), Pair of s2 door speaker grilles. |
|
| Author: | Brett928S2 [ Mon Mar 12, 2012 9:37 pm ] |
| Post subject: | Re: Wanted interior parts |
Hi 944 or 928 S2 ? All the best Brett
|
|
| Author: | Richy_S [ Mon Mar 12, 2012 9:53 pm ] |
| Post subject: | Re: Wanted interior parts |
Brett928S2 wrote: Hi 944 or 928 S2 ? All the best Brett Is there such a thing as a 928 convertible? I think not. I'm sure I have some floor mat holders - will take a look tomorrow. Rich |
|
| Author: | Brett928S2 [ Mon Mar 12, 2012 10:04 pm ] |
| Post subject: | Re: Wanted interior parts |
Richy_S wrote: Brett928S2 wrote: Hi 944 or 928 S2 ? All the best Brett Is there such a thing as a 928 convertible? I think not. I'm sure I have some floor mat holders - will take a look tomorrow. Rich Hi Rich There are a few...all aftermarket though... Around 3 in the Uk and around a dozen in the US i think... All the best Brett
|
|
| Author: | mr2haz [ Mon Mar 12, 2012 10:11 pm ] |
| Post subject: | Re: Wanted interior parts |
Sorry, I have a 1990 944. |
|
| Author: | 944-Scott [ Mon Mar 12, 2012 10:13 pm ] |
| Post subject: | Re: Wanted interior parts |
If needed still I have some floor mat holders knocking around. |
|
| Author: | mr2haz [ Sat Mar 17, 2012 11:26 pm ] |
| Post subject: | Re: Wanted interior parts |
Bump |
|
| Author: | Althejazzman [ Sun Mar 18, 2012 8:29 pm ] |
| Post subject: | Re: Wanted interior parts |
944-Scott wrote: If needed still I have some floor mat holders knocking around. What do these look like? I can see the three mounting holes in the driver's mat, but how is it supposed to lock to the floor? |
|
| Author: | 944-Scott [ Fri Mar 23, 2012 10:47 pm ] |
| Post subject: | Re: Wanted interior parts |
These have what look like half a press stud attached to them. |
|
| Author: | nicksonmsport [ Sat May 19, 2012 1:25 pm ] |
| Post subject: | Re: Wanted interior parts |
i have the cig lighter, the trim it goes in, and front speaker grills. pm me thanks |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|