Porsche Enthusiasts Club Forum
https://forums.tipec.net/

Genuine Porsche Cup 3 17" alloy wheels and tyres for sale
https://forums.tipec.net/viewtopic.php?f=36&t=11124		 Page 1 of 1
Author:  stevie d [ Sat Jun 04, 2011 10:03 pm ]
Post subject:  Genuine Porsche Cup 3 17" alloy wheels and tyres for sale
Also known as Turbo Twist or Boxster S alloys , front wheels are 7J Et 55 shod with 205/50/17 tyres with 3-4mm of tread in the centre but are worn on the inside edge so would probably need to be replaced for road use but may be ok for a track day or two . Rears are 8.5j Et 50 with all most new 255/40/17 tyres which have 7mm of even tread remaining . No splits , buckling , kerbing , scratches or chunks missing but they do have some corrosion and flaking paint (worse on the inside of the alloys) so would benefit from either a partial or full sand down and respray . I'm tempted to do this myself but I'm currently busy on another project although i might change my mind if i find the time . In the meantime they are up for sale at £250 . Any further questions please . NOW SOLD

Attachments:
P1110351.JPG
P1110351.JPG [ 174.27 KiB | Viewed 4100 times ]
Author:  stevie d [ Sun Jun 19, 2011 12:40 pm ]
Post subject:  Re: Genuine Porsche Cup 3 17" alloy wheels and tyres for sa
Here's a couple of photos of the wheels on my car
Image
Image
There is some corrosion around the valve on this wheel but the other marks on the alloy and tyre are just dirt .
Author:  Llewelyn [ Sat Sep 17, 2011 5:02 pm ]
Post subject:  Re: Genuine Porsche Cup 3 17" alloy wheels and tyres for sa
It's a long shot.... You still got these?
Author:  stevie d [ Sat Sep 17, 2011 5:29 pm ]
Post subject:  Re: Genuine Porsche Cup 3 17" alloy wheels and tyres for sa
Sorry , i should have updated the post . they are now sold . i've got a set of 15" teledials and tyres for sale or an 8J 16" D90 if thats any use to you ?
Author:  Llewelyn [ Sun Sep 18, 2011 9:03 pm ]
Post subject:  Re: Genuine Porsche Cup 3 17" alloy wheels and tyres for sa
Aha! It was a while ago!

I would be interested in 16" teledials (for a 928) but they seem to be quite scarce so I am now considering other options in the form of cup wheels so unfortunately they are no use to me but thanks for the reply - I wasn't expecting one since the original post was ages ago! :)
Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/