Porsche Enthusiasts Club Forum

starting to have a clearout of parts so we can concentrate on our 924 turbo gtr project.

I have a 1986 Porsche 944 turbo bodyshell available, ready for race build. shell has logbook present.
perfect shell to build up for race/track use. and of course any combination of drivetrain can be installed to race the car in whichever series you intend.

bodyshell is VERY clean. the only rust to be found on the whole car was slight bubbling of the outer sill, starting to spread into the lower rear 1/4. all of this was cut out to inspect the inner sills which are like new! we will be repairing the outer sill so the shell will be mint. rear beam mounts are solid.

the shell has had all the interior sound matting removed, along with the seam sealer applied to the inside of the shell

we have already installed weld in seat mounts to suit side mount seats, along with 6 points for harness

next stage is to install weld in or bolt in rollcage but we would rather do this to desired spec for potential customer

we would be happy to sell the shell at this stage, or we can go the whole hog and have the shell acid dipped, and fully seam welded. again we can build to your desired spec.

please get In touch if you are looking to go racing and require a good base shell with fabrication work carried out. also a perfect spare shell for anyone already racing a 944.

for examples of our work go to www.nicksonmotorsport.co.uk

would really like to find a home for this. we also have a lot of 944 turbo parts which can go with the shell for rebuild at extra cost.

many thanks
nick

this shell is now SOLD! and will be fully rebuilt!

many thanks
nick