| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| 924s sunroof https://forums.tipec.net/viewtopic.php?f=3&t=13191 |
Page 1 of 1 |
| Author: | landywood [ Mon Jun 11, 2012 11:17 am ] |
| Post subject: | 924s sunroof |
the sunroof on my 924s will open and close but the arms will not retract to enable removal. Checked all relays, limit switches and console switch. Only fault I can find is that there is no voltage at terminal A on sunroof relay. Where is this terminal supplied from. Thanks |
|
| Author: | JW590 [ Mon Jun 11, 2012 4:46 pm ] |
| Post subject: | Re: 924s sunroof |
Are you following the instructions correctly? From my 944S2 Driver's manual - 1. Turn ignition switch to position 1 (radio) and press rear half of rocker switch until the actuators release the roof. 2. Undo front hinges. 3. Lift and remove roof. To refit - 1, 2 and 3 tell you how to put it back in the hole. 4. Turn ignition switch to position 1 (radio) and press front halves of rocker switches (I've left the errors in - there's only one switch) until the actuators lock the roof. |
|
| Author: | landywood [ Tue Jun 12, 2012 7:33 am ] |
| Post subject: | Re: 924s sunroof |
Hi thanks for info. I am operating as you describe but I seem to be short of voltage at terminal A. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|