Porsche Enthusiasts Club Forum :: View topic

Hi All,

Just had a call from the garage sorting mine out. They need a CV joint inner OSR.

I will start looking , but has anyone got any recommendations for supplier?

i might just get them to get one in, but thought I would ask.

Am at work, so can't spend too long looking myself.

Thanks
Regards
Paul

Well that might be good news. Someone just said they are not made and I need a new drive shaft.

Will check them out!

Thanks Jim,

Regards
Paul

Thanks Jim,
I found the design911 one afterwards, although only when I searched by the part number.
I have rung Type911 to see what they come back with.

Thanks for your help, it has saved me some cash.

Regards
Paul

watchcam wrote:

You can afford to run a 928, you don't need to save any cash or is to save for the fuel :mrgreen:

No problem glad to help!

Author:	watchcam [ Mon Mar 22, 2010 11:14 am ]
Post subject:	Help! :-)
Hi All, Just had a call from the garage sorting mine out. They need a CV joint inner OSR. I will start looking , but has anyone got any recommendations for supplier? i might just get them to get one in, but thought I would ask. Am at work, so can't spend too long looking myself. Thanks Regards Paul

Author:	tr7v8 [ Mon Mar 22, 2010 11:38 am ]
Post subject:	Re: Help! :-)
watchcam wrote: Hi All, Just had a call from the garage sorting mine out. They need a CV joint inner OSR. I will start looking , but has anyone got any recommendations for supplier? i might just get them to get one in, but thought I would ask. Am at work, so can't spend too long looking myself. Thanks Regards Paul When we wanted one last year Paul bought his from Type911 around £50ish + P &P if I remeber correctly. You'll need new bolts & not all the replacements come with them, this one did!

Author:	watchcam [ Mon Mar 22, 2010 11:59 am ]
Post subject:	Re: Help! :-)
Well that might be good news. Someone just said they are not made and I need a new drive shaft. Will check them out! Thanks Jim, Regards Paul

Author:	tr7v8 [ Mon Mar 22, 2010 1:04 pm ]
Post subject:	Re: Help! :-)
watchcam wrote: Well that might be good news. Someone just said they are not made and I need a new drive shaft. Will check them out! Thanks Jim, Regards Paul Doh! Just spotted that it is for a 928! I was quoting 944, but I'd have thought they were still available as they are very generic & not made by Porsche, normally by GKN or similar! Edited to say Porscheshop list them on a google & so do others. http://www.porscheshop.co.uk/acatalog/p ... arbox.html As do Design 911! http://www.design911.com/928-1978-95/CV ... 81-cmo126/

Author:	watchcam [ Mon Mar 22, 2010 1:15 pm ]
Post subject:	Re: Help! :-)
Thanks Jim, I found the design911 one afterwards, although only when I searched by the part number. I have rung Type911 to see what they come back with. Thanks for your help, it has saved me some cash. Regards Paul

Porsche Enthusiasts Club Forum https://forums.tipec.net/

Help! :-) https://forums.tipec.net/viewtopic.php?f=27&t=8157	Page 1 of 1

Author:	tr7v8 [ Mon Mar 22, 2010 2:30 pm ]
Post subject:	Re: Help! :-)
watchcam wrote: Thanks Jim, I found the design911 one afterwards, although only when I searched by the part number. I have rung Type911 to see what they come back with. Thanks for your help, it has saved me some cash. Regards Paul You can afford to run a 928, you don't need to save any cash or is to save for the fuel No problem glad to help!

Author:	watchcam [ Mon Mar 22, 2010 2:43 pm ]
Post subject:	Re: Help! :-)
tr7v8 wrote: watchcam wrote: Thanks Jim, I found the design911 one afterwards, although only when I searched by the part number. I have rung Type911 to see what they come back with. Thanks for your help, it has saved me some cash. Regards Paul You can afford to run a 928, you don't need to save any cash or is to save for the fuel No problem glad to help! I scrape by! I have been popping out late at night draining 944s of their fuel I just popped down to see them and went with getting the unit reconditioned for around a hundred quid. So less than one replacement joint and the whole lot including boots with be made to look like new. Will let all know final cost and try to get some pictures. I did see pretty much all the brakes done now, which was good. Slowly getting there! Regards Paul

Author:	watchcam [ Mon Mar 22, 2010 8:18 pm ]
Post subject:	Re: Help! :-)
Here is a shot of the new front discs, hoses, pads and calipers And another: The new steering rack and ends is poking out. Needs a clean under there I see clean blue paint in the grime by the hose holding thingy.

Author:	Lee 944 [ Mon Mar 22, 2010 8:20 pm ]
Post subject:	Re: Help! :-)
Those are big brakes. No wonder they cost so much! Lee.

Author:	watchcam [ Mon Mar 22, 2010 9:16 pm ]
Post subject:	Re: Help! :-)
Euro Car Parts sent me some S4 brakes in error and they were even larger. The discs are heavy beasts for sure.

Page 1 of 1	All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/