Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
Door trim needed. https://forums.tipec.net/viewtopic.php?f=27&t=7884 |
Page 1 of 1 |
Author: | lightning [ Sat Feb 20, 2010 6:18 pm ] |
Post subject: | Door trim needed. |
I need the drivers side door trim, actually the part with the vents and electric mirror switches in it, mine has broken at the back where the arm rest fits. It's dark blue. I did see a dark blue drivers door card on ebay recently but can't find it now, must have sold. My actual door card is fine, it's just the large plastic trim that has the arm rest in it that's broken. If anybody sees one on ebay can you let me know? I never seem to find these parts in my searches. |
Author: | watchcam [ Sat Feb 20, 2010 6:49 pm ] |
Post subject: | Re: Door trim needed. |
Hi Lightning ... they come up a lot. You wont have to wait long. There have been at least two sets in the last month.Will let you know as soon as one comes up. As you know I am all over whats on ebay for 928's ![]() I do know someone on the 928UK list has a spare set .... might be worth dropping a note on there ![]() Regards Paul |
Author: | 928nut [ Sun Feb 21, 2010 9:13 am ] |
Post subject: | Re: Door trim needed. |
if only the mountings are broken-like mine-you can use: http://www.mailordercentral.com/928intl ... er=ARMREST it worked on mine. Phil 1st post ![]() |
Author: | lightning [ Sun Feb 21, 2010 2:13 pm ] |
Post subject: | Re: Door trim needed. |
Is that a repair plate? On my car the rear part has broken, there are two mountings to the rear of the oddments bin which are broken and the rear mounting for the fold out armrest is loose because of this. Also the trim to the rear of the arm rest (a wedge shaped end piece) is not secure. |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |