Porsche Enthusiasts Club Forum
https://forums.tipec.net/

SANTAPOD...FAST SHOW...9th March
https://forums.tipec.net/viewtopic.php?f=27&t=788
Page 1 of 1

Author:  Brett928S2 [ Fri Mar 07, 2008 8:17 pm ]
Post subject:  SANTAPOD...FAST SHOW...9th March

Hi All :)

If anyone is interested in seeing the 928, I will be at SANTAPOD all day on Sunday in the Wizards of Nos display area...

I will be the old guy with the grey hair and the blue race suit with the big Porsche badge on the back :)

All the best Brett :)

Author:  Brett928S2 [ Mon Mar 10, 2008 10:36 pm ]
Post subject:  Re: SANTAPOD...FAST SHOW...9th March

Hi All :)

OK....here is what went on at the Pod... :)

After a couple of teething problems with my piping, where a Nitrous pipe released at 950 psi and I managed to lose the contents of both my 15 lb bottles rather rapidly lol...

I then set it all up again and having refilled with another 30 lbs , I turned on my twin bottle heaters and once pressure was back up at 950 psi , I headed for the fire up lane...

I then got to staging....I rolled it through the water for a rolling burnout under Nitrous power :)

I shot past the tree ..lol and had to reverse back to stage in the cloud of smoke that I had created...

I then staged and waited for the green....

Green hit the light and I hit the loud pedal....

That when it got really funny lol....

I have no LSD and so I had so much power that my rear left started spinning....

And kept spinning as I headed up the track......1/4 track...STILL SPINNING..

Half track.....STILL SPINNING

3/4 track......STILL SPINNING

Full track....STILL SPINNING

Time was a 17.46 at 94.87 mph.....lol


I have NEVER felt so much power in a street car and obviously my car/Nitrous system is designed for high speed runs....not drag racing...and all I did for the whole run was keep pulling the wheel to the left to try and keep it straight :)

I did see 7500 revs on the tacho at one stage although I did melt a plug as I went through the timing light at the top end...

The plug gone meant my day was finished (why is it always the LAST one you change out of 8 thats the bad one lol)

I will add 2 pictures of the melted plug...

In total it was a great and relaxing day, got a lot of setting up done and will now move to NGK B9ECS (retracted nose plugs and 2 more heat ranges colder) to save melting any more, I will also alter the fuel/Nitrous ratio to a safer level, lol...

Image
Image
Image

All the best Brett :)

Author:  Sean Smallman [ Tue Mar 11, 2008 4:40 am ]
Post subject:  Re: SANTAPOD...FAST SHOW...9th March

I'm glad you had a good day.

It's a bit late in the day to start thinking about safety. :lol: :bom:

Author:  Brett928S2 [ Tue Mar 11, 2008 9:51 am ]
Post subject:  Re: SANTAPOD...FAST SHOW...9th March

Hi Sean :)

lol..i meant safety for the engine not me :)

All the best Brett :)

Author:  Sean Smallman [ Tue Mar 11, 2008 9:59 am ]
Post subject:  Re: SANTAPOD...FAST SHOW...9th March

Brett928S2 wrote:
Hi Sean :)

lol..i meant safety for the engine not me :)

All the best Brett :)


I'm pleased your considering the V8, I thought you might be getting a little nervous about knocking on the pearly gates prematurely :angel12:

Author:  Brett928S2 [ Thu Apr 03, 2008 11:50 pm ]
Post subject:  Re: SANTAPOD...FAST SHOW...9th March

Hi All :)

Someone sent me a mini dvd of my 1/4 mile with the wheels spinning, I have converted it and uploaded to Youtube....but no sound

http://uk.youtube.com/watch?v=H1BLELmlLJ0

All the best Brett :)

Author:  lindsayhbrown [ Fri Apr 04, 2008 5:37 pm ]
Post subject:  Re: SANTAPOD...FAST SHOW...9th March

cool clip, pity theres no sound :cry:

Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/