Porsche Enthusiasts Club Forum
https://forums.tipec.net/

windscreen wiper improvements?
https://forums.tipec.net/viewtopic.php?f=27&t=7783		 Page 1 of 2
Author:  RiskyBusiness [ Wed Feb 10, 2010 12:20 am ]
Post subject:  windscreen wiper improvements?
Hello to all,

At speed, the wipers on my car start to lift, to the point that they are not very effective. Are there any aftermarket additions or improvements that can be made?

Thanks,

RB
Author:  bmjb [ Wed Feb 10, 2010 12:38 am ]
Post subject:  Re: windscreen wiper improvements?
RiskyBusiness wrote:
At speed, the wipers on my car start to lift, to the point that they are not very effective. Are there any aftermarket additions or improvements that can be made?


I think you have four options:

1. Different wiper blades, if you haven't already got them try the ones with spoilers or maybe the "Aero" style.

2. Replace the wiper arms, or at least the springs, to see if they improve the situation.

3. Drive slower, so that the wipers can keep up.

4. Drive faster but turn the wipers off and let the flow of air carry the water off the screen (you may also wish to use one of those water-repellant windscreen treatments, but some say they can interfere with your wax/polish so not good if you like a shiny finish)
Author:  Brett928S2 [ Wed Feb 10, 2010 1:40 am ]
Post subject:  Re: windscreen wiper improvements?
RiskyBusiness wrote:
Hello to all,

At speed, the wipers on my car start to lift, to the point that they are not very effective. Are there any aftermarket additions or improvements that can be made?

Thanks,

RB


Hi :)

What I did was...

Replaced wipers with one inch longer (20 instead of 19 from memory)

I got mine from OILMAN.... Blue as well lol...

Speed should make no difference as mine work fine at 150 plus...

I also tried one of those "treatments" which "sort of" worked but not worth £9...

Finally I got fed up with my rusty wiper arms so replaced with new, which improved them slightly...

Best of the above was probably the 1 inch extra....who says size doesn't matter :)

I deleted my rear as no point with tint...

All the best Brett :)
Author:  stratfordshark [ Wed Feb 10, 2010 8:59 am ]
Post subject:  Re: windscreen wiper improvements?
Have you got the Bosch pair with spoiler on driver side to resist lifting (you can have them on both sides if you wish)?

The arms are prone to lifting as only single spring arm. GTS arms had double spring which is usual arrangement on cars today.
Author:  911perv [ Wed Feb 10, 2010 9:10 am ]
Post subject:  Re: windscreen wiper improvements?
The 1991 on versions are the 2 spring ones, these are now listed for 1987 thru 95 cars
Author:  watchcam [ Wed Feb 10, 2010 8:11 pm ]
Post subject:  Re: windscreen wiper improvements?
Mine are just damn slow. Virtually stop as they sweep across the screen. Any thoughts??
Author:  tr7v8 [ Wed Feb 10, 2010 9:46 pm ]
Post subject:  Re: windscreen wiper improvements?
watchcam wrote:
Mine are just damn slow. Virtually stop as they sweep across the screen. Any thoughts??

Seized wheel box or linkage, knackered motor?
Author:  watchcam [ Wed Feb 10, 2010 10:52 pm ]
Post subject:  Re: windscreen wiper improvements?
Thanks Jim,
Could be, would make sense .... I will have a root around at the weekend and see what I can find.
Might spray some WD40 in the motor and linkages as well?

Regards
Paul
Author:  Brett928S2 [ Wed Feb 10, 2010 11:21 pm ]
Post subject:  Re: windscreen wiper improvements?
watchcam wrote:
Thanks Jim,
Could be, would make sense .... I will have a root around at the weekend and see what I can find.
Might spray some WD40 in the motor and linkages as well?

Regards
Paul


Hi Paul :)

You do realise there are TWO speeds...normal and fast...plus intermittent if you pull the lever towards you.....

Do both speeds work ???

Sounds like a seized linkage or motor gone :(

All the best Brett :)
Author:  watchcam [ Thu Feb 11, 2010 11:03 pm ]
Post subject:  Re: windscreen wiper improvements?
Hi Brett,

Not sure to be honest. I will have a fiddle tomorrow if I can.

I think I have tried both speeds, but can't be certain from memory. Something else to sort :-)

Regards
Paul
Author:  Brett928S2 [ Thu Feb 11, 2010 11:15 pm ]
Post subject:  Re: windscreen wiper improvements?
Brett928S2 wrote:
watchcam wrote:
Thanks Jim,
Could be, would make sense .... I will have a root around at the weekend and see what I can find.
Might spray some WD40 in the motor and linkages as well?

Regards
Paul


Hi Paul :)

You do realise there are TWO speeds...normal and fast...plus intermittent if you pull the lever towards you.....

Do both speeds work ???

Sounds like a seized linkage or motor gone :(

All the best Brett :)



Hi Paul :)

Oops I got that wrong....

1 click UP is normal speed

2 clicks UP is double speed

---------------------------

1 click DOWN is intermittent

---------------------------

Pull TOWARDS you is WINDSCREEN washers (HELD TOWARDS YOU)

1 flick TOWARDS you is 3 wipes only

----------------------------------

PUSH lever AWAY and HOLD is headlight washers


---------------------------------------------------------------------------------

Phew finally got that all correct...i think lol :)

All the best Brett :)
Author:  watchcam [ Thu Feb 11, 2010 11:40 pm ]
Post subject:  Re: windscreen wiper improvements?
Thanks Brett,
There is something wrong as it is just so slow it can't be right.
Will let you know whay I find.

Regards
Paul
Author:  stratfordshark [ Fri Feb 12, 2010 7:34 am ]
Post subject:  Re: windscreen wiper improvements?
Watchcam can I suggest you read Steve Jones' write-up on dismantling and refurbishing his wiper motor on the 928.org.uk site? May be the fix for yours. He's a very keen TIPEC guy too but I don't think he uses this forum much.
Author:  watchcam [ Fri Feb 12, 2010 8:35 am ]
Post subject:  Re: windscreen wiper improvements?
Thanks for that .... good advice, will check the article out and go from there.
It can't be too difficult to sort, just not got around to it yet.

Regards
Paul
Author:  Bizman928 [ Tue Feb 23, 2010 8:08 pm ]
Post subject:  Re: windscreen wiper improvements?
HI Paul

As Adrian kindly mentioned I had a replort on how to repair a sticking or stopped motor published in the last All Torque magazine. If you want me to send you the report off-list with some photo's I will gladly do that.

If you need any more infor just mail me.

Thanks
Steve
Page 1 of 2 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/