They say you should go out with a bang
| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Diesel !!! https://forums.tipec.net/viewtopic.php?f=27&t=22844 |
Page 2 of 2 |
| Author: | Sean Smallman [ Tue Aug 22, 2017 10:58 pm ] |
| Post subject: | Re: Diesel !!! |
They say you should go out with a bang
|
|
| Author: | Brett928S2 [ Fri Aug 25, 2017 10:37 pm ] |
| Post subject: | Re: Diesel !!! |
Hi All  Took the 928 for another 10 mile run this evening...thought it was getting better, then it had a huge coughing fit with flames so I am told which is (excess fuel) from exhaust , .. so new plugs on Sunday even though it seems to be running on all 8 , but a new set wont harm it lol... All the best Brett
|
|
| Author: | Brett928S2 [ Sun Aug 27, 2017 2:33 pm ] |
| Post subject: | Re: Diesel !!! |
Hi All Changed plugs for brand new set to improve problems with erratic running after putting diesel in.... running now gone from around 20% to around 60%...high speed running seems almost perfect but low speed is "fluffing" on medium throttle when trying to accelerate.... more miles needed I think.. Pictures on my Facebook... All the best Brett
|
|
| Author: | Brett928S2 [ Mon Aug 28, 2017 1:40 pm ] |
| Post subject: | Re: Diesel !!! |
Hi All Suspected MAF... as it may have not been diesel i put in after talking to Shell garage manager...sooo.. More confusing now ...lol...unplugged MAF....ran even worse.....then plugged MAF back in and runs a LOT better but not perfectly... almost like unplugging and replugging the MAF connector almost reset something else like maybe the LH...WEIRDER and weirder...Maf out again now to perfectly clean the 6 connector flat pins...even though they look ok ish...no corrosion etc... All the best Brett
|
|
| Author: | Brett928S2 [ Mon Aug 28, 2017 3:26 pm ] |
| Post subject: | Re: Diesel !!! |
Hi All MAF pins cleaned ...now running at about 95% of normal but still not quite right  All the best Brett
|
|
| Author: | Brett928S2 [ Thu Aug 31, 2017 7:14 pm ] |
| Post subject: | Re: Diesel !!! |
Hi All Got A new MAF plug and wiring coming from John Speake ...JDSPORSCHE... http://www.jdsporsche.com/index.html hopefully will cure my problem All the best Brett
|
|
| Author: | Brett928S2 [ Fri Sep 01, 2017 6:04 pm ] |
| Post subject: | Re: Diesel !!! |
Hi All Brand new MAF plug arrived from John Speak (JDSPORSCHE) ,,,Ordered yesterday, arrived this morning..pic on my Facebook... https://www.facebook.com/brett.ainley.1 All the best Brett
|
|
| Author: | Brett928S2 [ Sun Sep 17, 2017 10:24 pm ] |
| Post subject: | Re: Diesel !!! |
Hi All YESSSSS...finally fixed my 928 with help and advice from Paul Anderson...new LH fuel computer fitted and all running perfectly again.... CO set perfectly and Wideband reading in normal range..i might even get double figure fuel consumption now lol... Thanks Paul Anderson.... All the best Brett
|
|
| Author: | Prophead [ Mon Sep 18, 2017 8:10 pm ] |
| Post subject: | Re: Diesel !!! |
Brett928S2 wrote: Hi All YESSSSS...finally fixed my 928 with help and advice from Paul Anderson...new LH fuel computer fitted and all running perfectly again.... CO set perfectly and Wideband reading in normal range..i might even get double figure fuel consumption now lol... Thanks Paul Anderson.... All the best Brett great to hear you have it sorted! |
|
| Author: | Brett928S2 [ Mon Sep 18, 2017 8:14 pm ] |
| Post subject: | Re: Diesel !!! |
Prophead wrote: Brett928S2 wrote: Hi All YESSSSS...finally fixed my 928 with help and advice from Paul Anderson...new LH fuel computer fitted and all running perfectly again.... CO set perfectly and Wideband reading in normal range..i might even get double figure fuel consumption now lol... Thanks Paul Anderson.... All the best Brett great to hear you have it sorted! Hi Thanks...after rebuilding the fuel system several times...its a HUGE relief that its running perfectly again...lol All the best Brett
|
|
| Author: | Brett928S2 [ Sun Sep 24, 2017 9:57 pm ] |
| Post subject: | Re: Diesel !!! |
Hi All Final tune on car today...set CO`s perfectly and Wideband... all running fine... test drove and yayyyy ...all fine again after new LH computer Thanks to Paul Anderson All the best Brett
|
|
| Page 2 of 2 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|