Porsche Enthusiasts Club Forum
https://forums.tipec.net/

Nitrous Bottles Rebuilt and Polished....
https://forums.tipec.net/viewtopic.php?f=27&t=21462		 Page 1 of 1
Author:  Brett928S2 [ Mon May 23, 2016 7:18 pm ]
Post subject:  Nitrous Bottles Rebuilt and Polished....
Hi All :)

I run twin 15 lb Nitrous bottles (total of 30 lbs of liquid Nitrous available at all times)

Each year I strip and rebuild them and then fill and polish them before mounting them back in the car....

Here are some pictures of one (other is identical)

Plus final picture is them mounted in car....


Bottle rebuilt/filled and polished....

Attachment:
IMAG0251.jpg
IMAG0251.jpg [ 93.78 KiB | Viewed 10430 times ]


Bottle valve - Red part is an SPRV = Safe Pressure Release Valve.... Large black silver part is a Nitrous Pressure Transducer

Two outlets on back of valve...silver on left is OUT to engine.....black on right rear = balance pipe outlet to second bottle.

Attachment:
IMAG0249.jpg
IMAG0249.jpg [ 59.23 KiB | Viewed 10430 times ]


Label with bottle/nitrous amounts

Attachment:
IMAG0250.jpg
IMAG0250.jpg [ 136.81 KiB | Viewed 10430 times ]


Both bottles mounted in car

Attachment:
2014-05-24 16.18.26.jpg
2014-05-24 16.18.26.jpg [ 152.29 KiB | Viewed 10430 times ]



Any questions , just ask....

All the best Brett :)
Author:  Sean Smallman [ Mon May 23, 2016 7:33 pm ]
Post subject:  Re: Nitrous Bottles Rebuilt and Polished....
Buy some leather cleaner and clean the back of that seat FFS :lol:
Author:  Brett928S2 [ Mon May 23, 2016 8:10 pm ]
Post subject:  Re: Nitrous Bottles Rebuilt and Polished....
Hi Sean :)

I have enough trouble keeping the outside clean as a daily driver....little time left for the inside :)

Unless you are volounteering ?

All the best Brett :)
Author:  coolpaul [ Mon May 23, 2016 9:33 pm ]
Post subject:  Re: Nitrous Bottles Rebuilt and Polished....
Can you keep it in a straight line :roll:
Author:  Brett928S2 [ Mon May 23, 2016 10:59 pm ]
Post subject:  Re: Nitrous Bottles Rebuilt and Polished....
coolpaul wrote:
Can you keep it in a straight line :roll:


Hi Paul :)

Generally speaking Nitrous is ONLY used in straight lines :)

All the best Brett :)
Author:  MichaelW944 [ Tue May 24, 2016 6:18 am ]
Post subject:  Re: Nitrous Bottles Rebuilt and Polished....
Brett928S2 wrote:
coolpaul wrote:
Can you keep it in a straight line :roll:


Hi Paul :)

Generally speaking Nitrous is ONLY used in straight lines :)

All the best Brett :)


Whether you want to go around a corner or not, I'd expect the car to only go in a straight line with a nitrous shot! :lol:
Author:  Brett928S2 [ Tue May 24, 2016 7:44 am ]
Post subject:  Re: Nitrous Bottles Rebuilt and Polished....
Digi944 wrote:
Brett928S2 wrote:
coolpaul wrote:
Can you keep it in a straight line :roll:


Hi Paul :)

Generally speaking Nitrous is ONLY used in straight lines :)

All the best Brett :)


Whether you want to go around a corner or not, I'd expect the car to only go in a straight line with a nitrous shot! :lol:


Hi :)

Thats very true lol....

All the best Brett :)
Author:  sam [ Tue May 24, 2016 8:01 am ]
Post subject:  Re: Nitrous Bottles Rebuilt and Polished....
Thought the main issue was trying to keep the windscreen wipers on the car Brett? :D
Author:  Brett928S2 [ Tue May 24, 2016 5:11 pm ]
Post subject:  Re: Nitrous Bottles Rebuilt and Polished....
sam wrote:
Thought the main issue was trying to keep the windscreen wipers on the car Brett? :D


Hi Steve :)

Wow you have a good memory, that was a while ago lol :)

All the best Brett :)
Author:  coolpaul [ Tue May 24, 2016 9:42 pm ]
Post subject:  Re: Nitrous Bottles Rebuilt and Polished....
Looks like the dash has had a bit of makeover - Back to the future perhaps :wink:
Author:  Brett928S2 [ Tue May 24, 2016 9:53 pm ]
Post subject:  Re: Nitrous Bottles Rebuilt and Polished....
coolpaul wrote:
Looks like the dash has had a bit of makeover - Back to the future perhaps :wink:


Hi :)

Yup, I ran out of room for gauges and switches so sort of added my own instrument panel lol...

All the best Brett :)
Author:  coolpaul [ Wed May 25, 2016 5:59 pm ]
Post subject:  Re: Nitrous Bottles Rebuilt and Polished....
Brett928S2 wrote:
coolpaul wrote:
Looks like the dash has had a bit of makeover - Back to the future perhaps :wink:


Hi :)

Yup, I ran out of room for gauges and switches so sort of added my own instrument panel lol...

All the best Brett :)



It looks kind of serious though man
I don't think I would come alongside you at the lights :roll:
Author:  Brett928S2 [ Wed May 25, 2016 8:24 pm ]
Post subject:  Re: Nitrous Bottles Rebuilt and Polished....
coolpaul wrote:
Brett928S2 wrote:
coolpaul wrote:
Looks like the dash has had a bit of makeover - Back to the future perhaps :wink:


Hi :)

Yup, I ran out of room for gauges and switches so sort of added my own instrument panel lol...

All the best Brett :)



It looks kind of serious though man
I don't think I would come alongside you at the lights :roll:


Hi Paul :)

You would probably be put off by the noise at the lights lol....

Its VERY loud....

It can also step sideways if I give it a lot of power from a standing start, so I rarely do it...

All the best Brett :)
Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/