Hi, your post is in the wrong section.
Should be here > http://forums.tipec.net/viewforum.php?f=10
The mighty 928 does not use 'micoswitches' as they are to small and weak.
| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| drivers side window not droping down when pull handle https://forums.tipec.net/viewtopic.php?f=27&t=19323 |
Page 1 of 1 |
| Author: | ptp [ Thu Feb 12, 2015 4:08 pm ] |
| Post subject: | drivers side window not droping down when pull handle |
i hope somebody can help me with this problem, on my boxster 2001, the window does not drop down when i pull the handle, what ive done so far is 1, replaced the microswitch 2, wd40 every moving part 3, took the window motor out and will be replacing it but when i do pull the handle, it does drop or try to drop a couple of mm!! but not enough, and when i release the handle it goes straight back up!!! could somebody please HELP! thanks |
|
| Author: | Porker928 [ Sun Feb 15, 2015 1:09 pm ] |
| Post subject: | Re: drivers side window not droping down when pull handle |
Hi, your post is in the wrong section. Should be here > http://forums.tipec.net/viewforum.php?f=10 The mighty 928 does not use 'micoswitches' as they are to small and weak.
|
|
| Author: | Paul190h [ Wed Feb 18, 2015 10:35 am ] |
| Post subject: | Re: drivers side window not droping down when pull handle |
Porker928 wrote: Hi, your post is in the wrong section. Should be here > http://forums.tipec.net/viewforum.php?f=10 The mighty 928 does not use 'micoswitches' as they are to small and weak. 
|
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|