Hi
Cat you can just replace with an x-pipe and some straight pipe....
Air pump you just remove...I did....
All the best Brett
| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| 1988 Cat by pass https://forums.tipec.net/viewtopic.php?f=27&t=19040 |
Page 1 of 1 |
| Author: | potdog [ Fri Dec 19, 2014 8:36 am ] |
| Post subject: | 1988 Cat by pass |
Hi as said in subject .whats the crack in going about getting rid off cat and air pump on 1988 German LHD car, All so after any sort of body kit happy xmas cheers. |
|
| Author: | Brett928S2 [ Fri Dec 19, 2014 11:59 pm ] |
| Post subject: | Re: 1988 Cat by pass |
Hi Cat you can just replace with an x-pipe and some straight pipe.... Air pump you just remove...I did.... All the best Brett
|
|
| Author: | cococola [ Sat Dec 20, 2014 8:17 pm ] |
| Post subject: | Re: 1988 Cat by pass |
if you remove the cat then it will fail the mot as not standard. |
|
| Author: | tr7v8 [ Sat Dec 20, 2014 8:26 pm ] |
| Post subject: | Re: 1988 Cat by pass |
cococola wrote: if you remove the cat then it will fail the mot as not standard. Incorrect, cats were not a legal requirement until August 1993, they were however required in Germany & a few other markets before then. |
|
| Author: | mikec [ Sun Dec 21, 2014 6:52 pm ] |
| Post subject: | Re: 1988 Cat by pass |
I just installed this in the summer and am very happy with it http://www.nixsoft-consulting.co.uk/928spares/index.php?id=products Good time to check the flex plate as you will be able to access it with the exhaust out of the way. I just removed the belt from the air pump and left everything in place. As for the MOT. I just had mine done. Failed on a bunch of stuff but passed the emissions so no problem with the cat removed. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|