Thanks Geoff, How do i get hold of Roger in the Us? To be honest i just want to get the job done, im begining to think i should of just got another auto box
Many thanks Mark
| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Clutch master and slave cylinder https://forums.tipec.net/viewtopic.php?f=27&t=13589 |
Page 1 of 1 |
| Author: | mark280 [ Tue Aug 07, 2012 7:40 pm ] |
| Post subject: | Clutch master and slave cylinder |
Good evening all, as some of you will know im about to convert my 928 S4 from auto to manual. I still need to get the master and slave cylinders. Their about £200. Does anyone know if their made by Porsche? as i was hoping to get them cheaper from a motor factor. Thanks for looking Mark |
|
| Author: | Maybach_man [ Wed Aug 08, 2012 9:34 am ] |
| Post subject: | Re: Clutch master and slave cylinder |
they are not made by Porsche so are available oem. Depending on how quick you are doing this you could try roger in the us. If you are going to keep the car for sometime you may be better off to change some of the wear parts as a While Your In There job! regards Geoff |
|
| Author: | mark280 [ Wed Aug 08, 2012 4:57 pm ] |
| Post subject: | Re: Clutch master and slave cylinder |
Thanks Geoff, How do i get hold of Roger in the Us? To be honest i just want to get the job done, im begining to think i should of just got another auto box Many thanks Mark |
|
| Author: | Maybach_man [ Wed Aug 08, 2012 6:04 pm ] |
| Post subject: | Re: Clutch master and slave cylinder |
noooooooooooo  and ive got auto boxes i could sell you. you will really like the manual. Look up 928's rus on interweb, Roger is a really nice guy, hes a brit normally takes about 10 days to arrive. Geoff |
|
| Author: | Maybach_man [ Wed Aug 08, 2012 6:06 pm ] |
| Post subject: | Re: Clutch master and slave cylinder |
it might be as well to replace some of the wear items at the same time. |
|
| Author: | mark280 [ Wed Aug 08, 2012 6:08 pm ] |
| Post subject: | Re: Clutch master and slave cylinder |
Geoff, a big thank you  i will have a look All the very best Mark |
|
| Author: | bruce928gt [ Wed Aug 08, 2012 11:20 pm ] |
| Post subject: | Re: Clutch master and slave cylinder |
Hi Mark, have you tried Simon, i was given his contact details on this site. He's in the Norwich area. simonwatson@unitelconsultants.co.uk Bruce |
|
| Author: | mark280 [ Mon Aug 13, 2012 7:49 pm ] |
| Post subject: | Re: Clutch master and slave cylinder |
Thanks Bruce, i use Simon for all my parts he hasnt got any. Regards Mark |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|