Clutch master and slave cylinder

mark280 · **Posted:** Tue Aug 07, 2012 7:40 pm

Good evening all,
as some of you will know im about to convert my 928 S4 from auto to manual. I still need to get the master and slave cylinders. Their about £200. Does anyone know if their made by Porsche? as i was hoping to get them cheaper from a motor factor.

Thanks for looking Mark

Maybach_man · **Joined:** Tue Nov 06, 2007 6:35 pm **Posts:** 50

they are not made by Porsche so are available oem. Depending on how quick you are doing this you could try roger in the us. If you are going to keep the car for sometime you may be better off to change some of the wear parts as a While Your In There job!

regards

Geoff

mark280 · **Posted:** Wed Aug 08, 2012 4:57 pm

Thanks Geoff, How do i get hold of Roger in the Us? To be honest i just want to get the job done, im begining to think i should of just got another auto box :-(

Many thanks Mark

Maybach_man · **Joined:** Tue Nov 06, 2007 6:35 pm **Posts:** 50

noooooooooooo

and ive got auto boxes i could sell you. you will really like the manual. Look up 928's rus on interweb, Roger is a really nice guy, hes a brit normally takes about 10 days to arrive.

Geoff

Maybach_man · **Joined:** Tue Nov 06, 2007 6:35 pm **Posts:** 50

it might be as well to replace some of the wear items at the same time.

mark280 · **Posted:** Wed Aug 08, 2012 6:08 pm

Geoff, a big thank you :-)

i will have a look

All the very best Mark

bruce928gt · **Posted:** Wed Aug 08, 2012 11:20 pm

Hi Mark, have you tried Simon, i was given his contact details on this site.
He's in the Norwich area.

simonwatson@unitelconsultants.co.uk

Bruce

mark280 · **Posted:** Mon Aug 13, 2012 7:49 pm

Thanks Bruce, i use Simon for all my parts he hasnt got any.

Regards Mark

Porsche Enthusiasts Club Forum

Clutch master and slave cylinder

Who is online