Porsche Enthusiasts Club Forum
https://forums.tipec.net/

Access to replace headlight washer
https://forums.tipec.net/viewtopic.php?f=27&t=13194
Page 1 of 1

Author:  swoakes [ Mon Jun 11, 2012 6:00 pm ]
Post subject:  Access to replace headlight washer

How do you access the rear of the headlight washers to remove :?: Do you remove the fog/ aux lights :?:

Author:  Brett928S2 [ Mon Jun 11, 2012 6:40 pm ]
Post subject:  Re: Access to replace headlight washer

Hi Steve :)

I had this problem...got a brand new set of headlight washers because one of mine had a bit of the outer circle missing....

UNTIL... I found out you HAVE to remove the whole of the front PU to change them, which normally involves a grinder as the bolts rust solid :( :(

Soooo I still have a set of new ones...NOT FITTED lol...

All the best Brett :)

Author:  swoakes [ Mon Jun 11, 2012 6:59 pm ]
Post subject:  Re: Access to replace headlight washer

Brett928S2 wrote:
Hi Steve :)

I had this problem...got a brand new set of headlight washers because one of mine had a bit of the outer circle missing....

UNTIL... I found out you HAVE to remove the whole of the front PU to change them, which normally involves a grinder as the bolts rust solid :( :(

Soooo I still have a set of new ones...NOT FITTED lol...

All the best Brett :)


Mmm.... looks like I have the same problem then :( Thanks for the advice

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/