..., thanks for the tip Ben, but Iv,e painted these type strips before and as potdog says the right prep and your good to go, plasticisor scotch pad , prime , base, and clear
Ken
| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Rub strip ? https://forums.tipec.net/viewtopic.php?f=27&t=13156 |
Page 1 of 1 |
| Author: | kenthepipe [ Wed Jun 06, 2012 3:55 pm ] |
| Post subject: | Rub strip ? |
Does anyone have a decent passenger side rear rub strip they want to sell, mines looking a bit tired now, does,nt matter what colour as I can spray, but it must,nt be miss shaped. Ken |
|
| Author: | Porker928 [ Thu Jun 07, 2012 4:29 pm ] |
| Post subject: | Re: Rub strip ? |
Hi Ken I think you would have a lot of trouble painting a rub strip because they are plastic coated foam and semi-flexible. You would need a specialist paint and bonding agent made to colour match. Very expensive for such a small component. I suggest with all the scrap yard 928's around at the moment it would be easier to find an exact match for the part you want unless it was a special order paint job? Ben |
|
| Author: | potdog [ Thu Jun 07, 2012 5:33 pm ] |
| Post subject: | Re: Rub strip ? |
Hi only need plastisiser coat to paint new parts. Once it has been painted in its life just prime and topcoat with solour to match your car. |
|
| Author: | kenthepipe [ Thu Jun 07, 2012 6:38 pm ] |
| Post subject: | Re: Rub strip ? |
..., thanks for the tip Ben, but Iv,e painted these type strips before and as potdog says the right prep and your good to go, plasticisor scotch pad , prime , base, and clear Ken |
|
| Author: | Lee 944 [ Fri Jun 08, 2012 6:30 am ] |
| Post subject: | Re: Rub strip ? |
If you need Steptoe Watsons number, let me know. At the last count, he had 13 928's in his garden. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|