| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| 928 RACE TORQUE TUBE https://forums.tipec.net/viewtopic.php?f=27&t=11748 |
Page 1 of 1 |
| Author: | del@ace [ Thu Oct 06, 2011 1:40 pm ] |
| Post subject: | 928 RACE TORQUE TUBE |
hi have for sale alloy torque tube made by carl fausett 928 motorsport , and full set of solid mounts for engine and gearbox , realy only want to be used on a car fitted with full roll cage , also manual bearbox fitted with uprated 9 plate diff , was 8 but now has 9 plates , , i am converting my 928 after racing my car even with 400bhp getting whipped with smaller cars on tight circuits i am in the middle of fitting sierra cosworth rear diff, and straight cut dog box, which has come out of my rs500 which is putting ot 650bhp and 500ft torque so i know it can handle with ease the power that the 928 can give it , also has closed decked the block , and have 104mm pistons and dry sumping the engine , now i an not putting a mechanical pump on i have a 5gpm 12v electric pump to scavenge the oil back to the tank, ,also i have a 1978 928 with no sunroof that i have another manual torque tube and 4.7 engine would be perfect as a hscc 70 road sprts or the cscc |
|
| Author: | mobius [ Fri Oct 07, 2011 4:59 pm ] |
| Post subject: | Re: 928 RACE TORQUE TUBE |
How much for the box? I presume it is an LSD/PSD? Would it fit 78 4.5 racer? Bob |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|