I went to Halfrauds to buy one with no luck. They sell the right size but without the 'peg' bit that sticks out.
I doubt you can get them any more, so I'm just going to take the 'peg' of the old one and glue to the new one - should work.
Ben
| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Rear wiper blade https://forums.tipec.net/viewtopic.php?f=27&t=11580 |
Page 1 of 1 |
| Author: | joedr3dd [ Tue Aug 30, 2011 12:59 pm ] |
| Post subject: | Rear wiper blade |
Hello all Sorry for all the questions, does anyone know where i can buy a rear wiper blade, i need the whole thing ie blade and plastic bit not arm , its the one witch has a little metal pole to slot in, if that helps Cheers John |
|
| Author: | Porker928 [ Wed Aug 31, 2011 12:58 pm ] |
| Post subject: | Re: Rear wiper blade |
I went to Halfrauds to buy one with no luck. They sell the right size but without the 'peg' bit that sticks out. I doubt you can get them any more, so I'm just going to take the 'peg' of the old one and glue to the new one - should work. Ben |
|
| Author: | Lee 944 [ Wed Aug 31, 2011 6:00 pm ] |
| Post subject: | Re: Rear wiper blade |
Got mine from OPC for £10. I don't think I've found something I needed that OPC didn't have? Bought a few things today, and got a great discount. Phone them and pay for it, they post it out next day free. 
|
|
| Author: | bmjb [ Thu Sep 01, 2011 10:58 pm ] |
| Post subject: | Re: Rear wiper blade |
Porker928 wrote: I went to Halfrauds to buy one with no luck. They sell the right size but without the 'peg' bit that sticks out. I doubt you can get them any more, so I'm just going to take the 'peg' of the old one and glue to the new one - should work. The "peg" on my '84 is a metal pin that is reusable - just remove it from the hole in the frame of the blade and put it in the new one, it doesn't need gluing as it's shaped to fit correctly. I used a standard Bosch wiper blade - you just have to use the "old-fashioned" kind that still have a metal frame with the hole in it for the peg to go through, not the newer aero design. |
|
| Author: | joedr3dd [ Fri Sep 02, 2011 9:53 am ] |
| Post subject: | Re: Rear wiper blade |
cheers guys i have bought a normal 20" bosche blade and will re-use the pin (just found it on ground by car) phewCheers for the help |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|