Porker928 wrote:
I went to Halfrauds to buy one with no luck. They sell the right size but without the 'peg' bit that sticks out.
I doubt you can get them any more, so I'm just going to take the 'peg' of the old one and glue to the new one - should work.
The "peg" on my '84 is a metal pin that is reusable - just remove it from the hole in the frame of the blade and put it in the new one, it doesn't need gluing as it's shaped to fit correctly. I used a standard Bosch wiper blade - you just have to use the "old-fashioned" kind that still have a metal frame with the hole in it for the peg to go through, not the newer aero design.