| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Powder Coat / Chrome https://forums.tipec.net/viewtopic.php?f=27&t=10421 |
Page 1 of 1 |
| Author: | Barnsy9 [ Tue Feb 08, 2011 9:27 pm ] |
| Post subject: | Powder Coat / Chrome |
I am considering getting these parts powder coated or chromed. Am not that engine savvy, so could anyone tell me what the red & blue parts are called. Also would they be easy enough taken off and replaced or would a mechanic need to do this? Thanks in Advance. 
|
|
| Author: | Lee 944 [ Tue Feb 08, 2011 9:38 pm ] |
| Post subject: | Re: Powder Coat / Chrome |
Barnsy9 wrote: I am considering getting these parts powder coated or chromed. Am not that engine savvy, so could anyone tell me what the red & blue parts are called. Also would they be easy enough taken off and replaced or would a mechanic need to do this? Thanks in Advance. ? What parts? Pictures will help. |
|
| Author: | Barnsy9 [ Tue Feb 08, 2011 9:39 pm ] |
| Post subject: | Re: Powder Coat / Chrome |
Haha sorry, forgot the pic.  
|
|
| Author: | Lee 944 [ Tue Feb 08, 2011 9:44 pm ] |
| Post subject: | Re: Powder Coat / Chrome |
That is your inlet manifold in the middle ( where the air goes in ) and your cam covers on either side. I done this 6 months ago, so have all the part numbers. Gaskets and bits and pieces came to around £800. Mike Dowie added up all the receipts. Plus the cost of powder coating. I painted mine, look in the back in this section for the thread. The local powder coater would not do the cam covers as he thought it might melt in the heat once back on the car. |
|
| Author: | Lee 944 [ Tue Feb 08, 2011 10:21 pm ] |
| Post subject: | Re: Powder Coat / Chrome |
Found the thread. If you want all the part numbers, let me know. There are a few things you should replace while it is off, like the knock sensors. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|