| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Help needed https://forums.tipec.net/viewtopic.php?f=25&t=948 |
Page 1 of 1 |
| Author: | domone69 [ Fri Apr 04, 2008 7:46 pm ] |
| Post subject: | Help needed |
My front brakes on my 944 are not releasing,i have changed the servo and master and the pistons are moving freely,they just wont release when i put the brakes on...can any one help please? ? |
|
| Author: | Siggy [ Fri Apr 04, 2008 8:59 pm ] |
| Post subject: | Re: Help needed |
A few questions Why did you change the master cyl and servo? What happens when you undo a brake pipe? Are the pads free in the calipers? |
|
| Author: | tr7v8 [ Fri Apr 04, 2008 9:55 pm ] |
| Post subject: | Re: Help needed |
Try releasing a hose on the calliper, is it both front wheels? If it is most likely you have a duff master cyl. Also seen it before you may have a dead flexible hose which is acting as a one way valve, but this would be one wheel. |
|
| Author: | Richy_S [ Sat Apr 05, 2008 6:46 am ] |
| Post subject: | Re: Help needed |
If they weren't doing it before you changed the servo may be you have not adjusted the linkage correctly?? Release the pressure and check. Rich |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|