| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| has any one fitted powerflex bushes ???? https://forums.tipec.net/viewtopic.php?f=25&t=933 |
Page 1 of 2 |
| Author: | ryan 944 [ Wed Apr 02, 2008 6:39 pm ] |
| Post subject: | has any one fitted powerflex bushes ???? |
has any one fitted powerflex bushes ???? as i looked at the bushes on the anti rollbar on the front and they looked a little tied, so time for an upgrade. so ordered the bushes for my car 1984 944. the inner ones are fine but the outer on the wishbones are nothink like they list for a start off they are round ones, on my car they are round with a flat bottom. so this week i have been on the phone trying to sort it. just wondered if anyone else had come across this? 
|
|
| Author: | zola1 [ Wed Apr 02, 2008 6:58 pm ] |
| Post subject: | Re: has any one fitted powerflex bushes ???? |
ryan 944 wrote: has any one fitted powerflex bushes ???? as i looked at the bushes on the anti rollbar on the front and they looked a little tied, so time for an upgrade. so ordered the bushes for my car 1984 944. the inner ones are fine but the outer on the wishbones are nothink like they list for a start off they are round ones, on my car they are round with a flat bottom. so this week i have been on the phone trying to sort it. just wondered if anyone else had come across this? Hi Ryan, I changed the frt ARB bushes (see pic with ruler, old bush) Attachment: IMG_0995.JPG Fitted powerflex ones and also changed the drop link bushes, pressed them in and used coppa slip to help ease them in ! (see pic of old set up) Attachment: ARB LH FRT.JPG I had some drop links made up at work as the o/s was sheared off a the stud (common problem apparently), obviously it made a huge difference as the old ones we shot. I intend to change the wishbone ones at the same time fit the 968 castor mounts. Hope this helps Cheers |
|
| Author: | jameso [ Wed Apr 02, 2008 7:08 pm ] |
| Post subject: | Re: has any one fitted powerflex bushes ???? |
I fitted the full front end kit from powerflex to an 82 lux although a pain in the arse the fit was good. IIRC The shapes should be the same. |
|
| Author: | zola1 [ Wed Apr 02, 2008 7:22 pm ] |
| Post subject: | Re: has any one fitted powerflex bushes ???? |
jameso wrote: I fitted the full front end kit from powerflex to an 82 lux although a pain in the arse the fit was good. IIRC The shapes should be the same. Did it have the aluminium wishbones ? |
|
| Author: | jameso [ Wed Apr 02, 2008 7:25 pm ] |
| Post subject: | Re: has any one fitted powerflex bushes ???? |
No steel VW golf style |
|
| Author: | zola1 [ Wed Apr 02, 2008 7:49 pm ] |
| Post subject: | Re: has any one fitted powerflex bushes ???? |
jameso wrote: No steel VW golf style Ok, mine has the later ally ones and i think the 17" cup1's (mich pilots 225's) are hard on the ball joints (i get an occasional "graunch" ) when parking on a LH lock,,,, its difficult to pin piont exactly where its coming from but you "feel" it momentarily thro the str wheel, which makes me think its one of the ball joints that are dry, i may be a mile out ...its doesn't always do it though any thoughts on how track it down better ? cheers |
|
| Author: | jameso [ Wed Apr 02, 2008 8:11 pm ] |
| Post subject: | Re: has any one fitted powerflex bushes ???? |
Had that sort of noise on my old 82 was the ball joint but cheap fix, i dread that on my 89 due to much more pricey part. best of luck. I think ryan prob has the kit for the later car as the 84 should have steel arms and the end rubbers are flat |
|
| Author: | ryan 944 [ Wed Apr 02, 2008 10:16 pm ] |
| Post subject: | Re: has any one fitted powerflex bushes ???? |
yes i have got steel wishbones that were i think they have gone wrong and gine me the late ones instead  the best bit is they give me the part numbers when is was working at the autosport show, never mind i will get there in the end
|
|
| Author: | zola1 [ Sat Apr 05, 2008 8:08 pm ] |
| Post subject: | Re: has any one fitted powerflex bushes ???? |
ryan 944 wrote: yes i have got steel wishbones that were i think they have gone wrong and gine me the late ones instead the best bit is they give me the part numbers when is was working at the autosport show, never mind i will get there in the end Hi Ryan, Had mine up on lift today, do you recognise the form the pic's below which one of the ball joints is the "original" 20yr old one ? Attachment: PORSCHE NS BALL JOINT April 08.jpg Attachment: PORSCHE OS BALLJOINT April 08.jpg I'm gonna change it soon, any tips any one on a good quality part and where etc? Cheers |
|
| Author: | Richy_S [ Sat Apr 05, 2008 10:02 pm ] |
| Post subject: | Re: has any one fitted powerflex bushes ???? |
Hi Derrick - how you doing? I went down the Hartech route - I think they are generally recognised as the best aftermarket. Rich |
|
| Author: | tr7v8 [ Sat Apr 05, 2008 11:17 pm ] |
| Post subject: | Re: has any one fitted powerflex bushes ???? |
Richy_S wrote: Hi Derrick - how you doing? I went down the Hartech route - I think they are generally recognised as the best aftermarket. Rich I'll 2nd that, the ball joint kits are a PITA |
|
| Author: | zola1 [ Sun Apr 06, 2008 7:12 am ] |
| Post subject: | Re: has any one fitted powerflex bushes ???? |
Richy_S wrote: Hi Derrick - how you doing? I went down the Hartech route - I think they are generally recognised as the best aftermarket. Rich Hi Rich, Good to hear from you mate, yea i'm fine. Have you sold the silver rose (luvly car)..?, what ru drivn now ? i seem to recall you were goin the beetle route Are you goin to Gaydon this mornin? cheers |
|
| Author: | Richy_S [ Sun Apr 06, 2008 7:22 am ] |
| Post subject: | Re: has any one fitted powerflex bushes ???? |
zola1 wrote: Richy_S wrote: Hi Derrick - how you doing? I went down the Hartech route - I think they are generally recognised as the best aftermarket. Rich Hi Rich, Good to hear from you mate, yea i'm fine. Have you sold the silver rose (luvly car)..?, what ru drivn now ? i seem to recall you were goin the beetle route Are you goin to Gaydon this mornin? cheers Still got it, off the road at the mo doin brakes, wastegate and various other bits. Beetle? no not me - Mr Holmes. Whats on at Gaydon? Rich |
|
| Author: | zola1 [ Sun Apr 06, 2008 8:27 am ] |
| Post subject: | Re: has any one fitted powerflex bushes ???? |
Ahh yes now i recall.. gettn old memory loss  ,,, has yours got the the M030 suspension ? super adjustable Koni's etc , what's the ride like ?cheers |
|
| Author: | Richy_S [ Sun Apr 06, 2008 8:59 am ] |
| Post subject: | Re: has any one fitted powerflex bushes ???? |
Yeah M030 and 18 inch wheels. The ride is hard to say the least but as its not my daily driver I can handle it. In saying that I have just had the original forged wheels refurbed with new Toyo Proxes so I might well be going back to them. 
|
|
| Page 1 of 2 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|