| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Anti Roll Bar Sizes! https://forums.tipec.net/viewtopic.php?f=25&t=9308 |
Page 1 of 1 |
| Author: | Nobby369 [ Tue Aug 24, 2010 9:12 pm ] |
| Post subject: | Anti Roll Bar Sizes! |
I need new anti roll bar bushes for my '82 944. The problem I'm having is choosing the correct size. The bushes come in a variety of sizes but I don't know how or what you measure. I have measured the bar and it's 12.5mm-13mm diameter, non of the bushes I've looked at are anywhere near this.....help. |
|
| Author: | J.J. [ Wed Aug 25, 2010 7:53 pm ] |
| Post subject: | Re: Anti Roll Bar Sizes! |
You need to measure them as they came with different sizes depending what they had available at the factory. If they ran out you got a free upgrade! Mine has bigger roll bars than it should. Get underneath with a vernier. Do a search on this you will find plenty of posts. 
|
|
| Author: | 911perv [ Fri Aug 27, 2010 11:57 am ] |
| Post subject: | Re: Anti Roll Bar Sizes! |
I take it you mean the rear? All early cars were 14mm, bush is 477411313F £14 from OPC |
|
| Author: | J.J. [ Fri Aug 27, 2010 10:14 pm ] |
| Post subject: | Re: Anti Roll Bar Sizes! |
Correct. Was  last night. Two bush sizes. Front supports & also ends. You will also need the bushes for the drop links probably. If the links arn't in good shape I'd do them at the same time as they crack & fail & you lose your new bushes! If you order them from JMG they will send you the right set & if anythings wrong swap them without issue. OPC don't do that. Early cars narrow track so only one roll bar. Simples 
|
|
| Author: | 911perv [ Sat Aug 28, 2010 7:26 am ] |
| Post subject: | Re: Anti Roll Bar Sizes! |
Is it the front or rear? There are no options on the rear, only 14mm |
|
| Author: | Nobby369 [ Sun Aug 29, 2010 7:02 pm ] |
| Post subject: | Re: Anti Roll Bar Sizes! |
Thanks for the help guys. I have removed the bar and measured it and if I've got the sizes right new ones should be here in a few days. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|