Porsche Enthusiasts Club Forum
https://forums.tipec.net/

Suspention rebuild. Camber Q
https://forums.tipec.net/viewtopic.php?f=25&t=9183		 Page 1 of 1
Author:  J.J. [ Thu Aug 05, 2010 9:08 pm ]
Post subject:  Suspention rebuild. Camber Q
Well I've done everything else! Along with my new gearbox for this Winter. New bottom arms & 968 castor mounts on order courtesy of Sulzerek. New rubber bushes for arms & trailing arms (rollbar already done.) New Spax PSX kit adjustable height & damping ? (Rear lowered itself.) How much camber adjustment is there with the stock eccentric bolts on the bottom of the front struts. Do I need adjustable top mounts? Will need half to one degree negative camber on the fronts. If I can get that from the eccentric bolts I could get cheaper non adjustable top mounts?
Author:  tr7v8 [ Thu Aug 05, 2010 10:27 pm ]
Post subject:  Re: Suspention rebuild. Camber Q
You should be able to get close to 1 deg with the eccentrics. It depends on a lot of factors such as tolerances etc.
Author:  J.J. [ Fri Aug 06, 2010 12:47 pm ]
Post subject:  Re: Suspention rebuild. Camber Q
Thats good news. Thanks Jim. Was thinking about giving these a try. http://www.944online.com/cgi-bin/ASI_Store.cgi?Product+skukey_1218827932
Author:  tr7v8 [ Fri Aug 06, 2010 1:02 pm ]
Post subject:  Re: Suspention rebuild. Camber Q
J.J. wrote:
Thats good news. Thanks Jim. Was thinking about giving these a try. http://www.944online.com/cgi-bin/ASI_Store.cgi?Product+skukey_1218827932

OK if you want to buy gadgets.... Have a look at Elephant racing as well some of their stuff is gorgeous!
Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/