Porsche Enthusiasts Club Forum
https://forums.tipec.net/

Wheel options
https://forums.tipec.net/viewtopic.php?f=25&t=8821
Page 1 of 1

Author:  vince944red [ Mon Jun 21, 2010 8:37 am ]
Post subject:  Wheel options

I've a 1986 2.5NA (definantly oval dash and an 86 model)
It has 16 inch teledials

question - will 16 inch d90s from an S2 fit?
question - what ET will my exsiting wheels have, I have not taken them off to have a look!

Author:  tr7v8 [ Mon Jun 21, 2010 8:41 am ]
Post subject:  Re: Wheel options

vince944red wrote:
I've a 1986 2.5NA (definantly oval dash and an 86 model)
It has 16 inch teledials

question - will 16 inch d90s from an S2 fit?
question - what ET will my exsiting wheels have, I have not taken them off to have a look!

Pre 87 then the ET will be in the 20s & you need wheels with this offset or later wheels (ET50ish which S2 wheels will be) with spacers. Spacer width will depend on wheel widths & to a certain extent tyre size.

Author:  circo [ Tue Jun 22, 2010 5:16 pm ]
Post subject:  Re: Wheel options

Jim, while you're on what ET will I need for an '87 turbo?

Author:  tr7v8 [ Tue Jun 22, 2010 5:49 pm ]
Post subject:  Re: Wheel options

circo wrote:
Jim, while you're on what ET will I need for an '87 turbo?
ET50ish

Author:  ben944 [ Thu Jun 24, 2010 12:01 pm ]
Post subject:  Re: Wheel options

vince944red wrote:
I've a 1986 2.5NA (definantly oval dash and an 86 model)
It has 16 inch teledials

question - will 16 inch d90s from an S2 fit?
question - what ET will my exsiting wheels have, I have not taken them off to have a look!


Whats up with the teledials? Teledials rock when they're refurb'd. Just was wondering why you were replacing them.

Author:  944 Man [ Thu Jun 24, 2010 6:55 pm ]
Post subject:  Re: Wheel options

Early offset cars (all series ones and 1986 model year series twos): 23mm
Later offset cars (nominal 7" rim width): 52.3mm

Author:  tr7v8 [ Thu Jun 24, 2010 8:22 pm ]
Post subject:  Re: Wheel options

944 Man wrote:
Early offset cars (all series ones and 1986 model year series twos): 23mm
Later offset cars (nominal 7" rim width): 52.3mm

Isn't ET20ish & ET50ish close enough then :mrgreen: Depends on where the wheels are sourced from & final widths anyway.

Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/