| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| Front bumper removal S2 how easy https://forums.tipec.net/viewtopic.php?f=25&t=8488 |
Page 1 of 1 |
| Author: | David924S [ Wed May 05, 2010 7:53 am ] |
| Post subject: | Front bumper removal S2 how easy |
I realise this is an open question and probably depends on whether the fixings can be removed but I need to either remove or drop one side of my bumper so I can get to some minor rust spot on the front on my O/S wing right on the join between the bumper and the wing, if I could drop this side by 1/2" -1" I could probably get to the rust any ideas? |
|
| Author: | t3rra [ Wed May 05, 2010 6:41 pm ] |
| Post subject: | Re: Front bumper removal S2 how easy |
There's 2 points of acesse, were you can un screaw the front wing from the top side of the bumper. 8 mm racket will be needed and some bendy wrists. If u havnt got the lower under tray then using extention bars u can reach theses bolts and turn from under the bumper., u can leave this on but will find it aword. The 1st bolts on each side can be undone slimply from the wheel arch, the rest will require 1st there's a flap in the wheel arch liner. Push this in or pull out, your also want 2 turn wheels full lock. 2nd under the bonnet, near the right of the headlights Is a large 4/6" plug, remove, this is also used 2 get acsses 2 the headlight adjestment. |
|
| Author: | David924S [ Thu May 06, 2010 8:04 am ] |
| Post subject: | Re: Front bumper removal S2 how easy |
Thanks for the help if it stops raining at the weekend I might get it done. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|