| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| a https://forums.tipec.net/viewtopic.php?f=25&t=8430 |
Page 1 of 1 |
| Author: | ribena26 [ Tue Apr 27, 2010 12:18 pm ] |
| Post subject: | a |
h |
|
| Author: | sulzeruk [ Tue Apr 27, 2010 1:04 pm ] |
| Post subject: | Re: how do side repeaters come off a 944? |
They clip in, just prise them off gently, Alasdair |
|
| Author: | t3rra [ Tue Apr 27, 2010 9:39 pm ] |
| Post subject: | Re: how do side repeaters come off a 944? |
Just a word off warning, I changed mine 4 clear ones, which didn't clip back in flush. Till u used a drimmel 2 cut away some off the existing hole.( had 2 make it larger towards the door) also take care not 2 drop the light stork and cable inside the wing. |
|
| Author: | dirtydirtyharry [ Wed Apr 28, 2010 7:54 pm ] |
| Post subject: | Re: how do side repeaters come off a 944? |
t3rra wrote: Just a word off warning, I changed mine 4 clear ones, which didn't clip back in flush. Till u used a drimmel 2 cut away some off the existing hole.( had 2 make it larger towards the door) also take care not 2 drop the light stork and cable inside the wing. I bought new repeaters and have the same problem. The existing lugs dont fit properly into the existing holes. I think a dremmel will be needed 
|
|
| Author: | t3rra [ Wed Apr 28, 2010 8:09 pm ] |
| Post subject: | Re: how do side repeaters come off a 944? |
took me like 10 secs with a dremell, or u could use a file or sand paper. iv found my dremell very use full |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|