| Porsche Enthusiasts Club Forum https://forums.tipec.net/ |
|
| 968 Undertray Wanted https://forums.tipec.net/viewtopic.php?f=25&t=8333 |
Page 1 of 1 |
| Author: | SteveSAS [ Mon Apr 12, 2010 7:48 pm ] |
| Post subject: | 968 Undertray Wanted |
HI, Anyone have one or know of place to find one other than buying new? Thanks |
|
| Author: | Richy_S [ Mon Apr 12, 2010 7:56 pm ] |
| Post subject: | Re: 968 Undertray Wanted |
The plastic bit or the tin bit? I think the plastic bit may be the same as an S2 but not 100% sure. Rich |
|
| Author: | SteveSAS [ Tue Apr 13, 2010 3:02 pm ] |
| Post subject: | Re: 968 Undertray Wanted |
Yeah as far as I know it's the main plastic bit that apparently comes in two parts, one smaller than the other. Porsche want £140 for complete new one so didn't really want to pay that for something that sits underneath. Mine was missing when I bought it so wondered how much difference they make, looking underneath the belts seem protected enough by small front section from bumper anyway. But yeah if someone has any part of one I'll be interested. Steve |
|
| Author: | AlpineTurbo [ Tue Apr 13, 2010 4:50 pm ] |
| Post subject: | Re: 968 Undertray Wanted |
Where are you in the country? I have a spare S2 item if you want it. £30 seem ok? |
|
| Author: | SteveSAS [ Wed Apr 14, 2010 9:49 am ] |
| Post subject: | Re: 968 Undertray Wanted |
Hi mate, I'm in Kent near to Dartford, do you have both parts?? Checked with Porsche & the smaller (rear) part is the same as 944 but not the large (front) part. If they have no cracks & pieces missing then that would be great £30 is fine. Thanks Steve |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|