Porsche Enthusiasts Club Forum
https://forums.tipec.net/

a
https://forums.tipec.net/viewtopic.php?f=25&t=7981		 Page 1 of 1
Author:  ribena26 [ Tue Mar 02, 2010 9:55 am ]
Post subject:  a
a
Author:  ribena26 [ Tue Mar 02, 2010 10:39 am ]
Post subject:  Re: what ecu do i need?
i have the bosh part no. now. its 0261.200.076

any body have one i can buy?
theres non on ebay the same

ta
Author:  J.J. [ Tue Mar 02, 2010 10:42 am ]
Post subject:  Re: what ecu do i need?
You need to get the right one as it has to match the AFM. Of repace them both. Porscheapart will have the right one.
Author:  ribena26 [ Tue Mar 02, 2010 10:57 am ]
Post subject:  Re: what ecu do i need?
the bosh part no is 0261.200.076 is it best to match it using that? a breaker i cantacted wanted to match it using the porsche part no which is 944.618.121.03 (TYP 944 mws-01) but the porsche part no seems to match up lots of models from what ive researched already.
Author:  watchcam [ Tue Mar 02, 2010 11:02 am ]
Post subject:  Re: what ecu do i need?
I noticed 0261.200.077 on ebay. Might not be any good to you though, but thought would mention in case it is backwards compatible.

There is a guy on the 928UK who is into ECUs - I have dropped him and email to see if he has any advice.

Regards
Paul
Author:  watchcam [ Tue Mar 02, 2010 11:11 am ]
Post subject:  Re: what ecu do i need?
Hi again,

John is only a 928 man, but thought you might get some luck trying these guys:

http://www.atpelectronics.co.uk/index.htm

Hope it helps,

Regards
Paul
Author:  ribena26 [ Tue Mar 02, 2010 11:24 am ]
Post subject:  Re: what ecu do i need?
watchcam wrote:
Hi again,

John is only a 928 man, but thought you might get some luck trying these guys:

http://www.atpelectronics.co.uk/index.htm

Hope it helps,

Regards
Paul


thanks, i have emailed atpelectronics. waiting for them to reply
Author:  Porsche [ Tue Mar 02, 2010 11:38 am ]
Post subject:  Re: what ecu do i need?
I've just bought a replacement for my S2 from eBay. The Bosch and Porsche part numbers match the original one I had on my car.
Author:  ribena26 [ Tue Mar 02, 2010 3:11 pm ]
Post subject:  Re: what ecu do i need?
ribena26 wrote:
watchcam wrote:
Hi again,

John is only a 928 man, but thought you might get some luck trying these guys:

http://www.atpelectronics.co.uk/index.htm

Hope it helps,

Regards
Paul


thanks, i have emailed atpelectronics. waiting for them to reply



they offered to repair it but its too expesive at half the value of the car
Author:  watchcam [ Tue Mar 02, 2010 3:17 pm ]
Post subject:  Re: what ecu do i need?
They'll get a lot of work then.

I think Ebay is best bet, just need to be patient or one of the Porsche breakers.

Good luck!

Paul
Author:  tr7v8 [ Tue Mar 02, 2010 5:09 pm ]
Post subject:  Re: what ecu do i need?
Give these guys a try http://www.ecu-testing.com/

Unfortunately pricing of repairs is based on the fact that new ones are 00's if not 000's pounds.
Author:  watchcam [ Tue Mar 02, 2010 7:16 pm ]
Post subject:  Re: what ecu do i need?
tr7v8 wrote:
Give these guys a try http://www.ecu-testing.com/

Unfortunately pricing of repairs is based on the fact that new ones are 00's if not 000's pounds.


I agree Jim ... but good used ones sell for £30 to £70 on Ebay. I guess it does need a great deal of knowledge to repair the things though.
Fingers crossed you get sorted soon.
Will keep an eye out for you Ribena.

Regards
Paul
Author:  ribena26 [ Tue Mar 02, 2010 8:02 pm ]
Post subject:  Re: what ecu do i need?
i grabbed one off ebay ten mins ago. exact one. hope its in working order. i paid 53.75 including delivery. much better than £160 the breakers wanted. ha i'll name and shame them next time they take the piss.

ta for all replies.
Author:  watchcam [ Tue Mar 02, 2010 9:04 pm ]
Post subject:  Re: what ecu do i need?
Good result!

It won't take too much imagination to think up who might have been taking the wee wee :-)

Glad you got one ...

Regards
Paul
Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/